Control Connections of the Transfer Switch
Show/hide table
 | |
| Illustration 1 | g00828982 |
Connections for the engine control are located on the lower left side of the MX100. See Illustration 1. Make all other necessary connections for control to the terminal blocks on the control panel per the schematics. See Schematic, RENR5853.
Note: All control wires (12 to 18 AWG) must be torqued to 2.15 N·m (19 lb in).
The terminal for the connection to the output contacts for the EMERGENCY position is provided. The output contacts for the NORMAL position is also provided. These terminals are marked and the terminals appear on the side of the panel. On 400 amp metal frame units, the terminals appear on the bracket above the operator handle.
Caterpillar Information System:
3512B and 3516B High Displacement Locomotive Engines Specifications
G3500B Engines Fumes Disposal Filter Element - Replace
G3500 Generator Sets Fumes Disposal Filter - Drain
G3612 and G3616 Engines Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
G3500B Engines Fumes Disposal Filter Differential Pressure - Check
2001/10/01 Parts Manuals for Skid Mounted Pumpers and Skid Mounted Power Packs Are Now Provided on CD-ROMs {7000}
PMG3516 Power Module Engine Crankcase Breather - Clean
Automatic Transfer Switches CTG, CTGD Series General Information
3512B and 3516B High Displacement Locomotive Engines Product Description
PMG3516 Power Module Starting the Engine
2001/11/12 A New Rear Housing Assembly is Available {1157}
3056E Industrial Engine Camshaft
PMG3516 Power Module Reference Material
Automatic Transfer Switches CTG, CTGD Series Power Failure Operation
3056E Industrial Engine Camshaft Bearings
3114, 3116, and 3126 Industrial and Generator Set Engines Fan Drive Bearing - Lubricate - If Equipped
Power Module Switchgear (Low Voltage and Medium Voltage) Before Starting Engine
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Starting
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Stopping
Power Module Switchgear (Low Voltage and Medium Voltage) Burn Prevention
Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421} Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421}
2001/10/01 New Piston Assemblies Are Used {1214}
G3408C and G3412C Engines Ignition Transformer
SR4 Generator with VR3 or VR4 Voltage Regulator Glossary