Crankshaft Position for Valve Lash Setting
The SAE standard engine crankshaft rotation is counterclockwise when the crankshaft is viewed from the flywheel end.
Show/hide table
Illustration 1 | g00284836 |
Cylinder and valve locations (A) Inlet valves (B) Exhaust valves |
Show/hide table
Crankshaft Positions for Valve Lash Setting
Standard Counterclockwise Rotation |
|||
Engine | Stroke for the Number 1 Piston at Top Center Position (1) | Inlet
Valves |
Exhaust
Valves |
G3406 | Compression | 1-2-4 | 1-3-5 |
Exhaust | 3-5-6 | 2-4-6 | |
Firing order | 1-5-3-6-2-4 |
Show/hide table
(1) | Put the No. 1 Piston at the top center (TC) position and identify the correct stroke. Refer to Testing And Adjusting, "Finding the Top Center Position for the The No 1 Piston". Find the top center (TC) position for a particular stroke and make the adjustment for the correct cylinders. Remove the timing bolt. Turn the flywheel by 360 degrees in the direction of normal engine rotation. This will put the No. 1 piston at the top center (TC) position on the other stroke. Install the timing bolt in the flywheel and complete the adjustments for the cylinders that remain. |
Caterpillar Information System:
SPS343 Skid Mounted Pumper Cooling System Coolant Level - Check
3126 Truck Engine Fuel Filter Lines
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Rating Definitions
Generator Set Start Module Electrical Connections
3054 and 3056 Marine Generator Sets Engine Crankcase Breather - Clean/Replace
SPS343 Skid Mounted Pumper Product Lifting
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Operation
3408E and 3412E Industrial Engines Analog Sensor Supply Circuit - Test
3408E and 3412E Industrial Engines System Overview
Generator Set Start Module Mounting
C-15 and C-16 Industrial Engines Maintenance Interval Schedule - C-16
G3406 Engine Valve Lash and Valve Bridge Adjustment
2007/01/29 Coolant Recommendation for 3618 Engines {1350, 1352, 1395}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel - Inspect
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Gear Group - Inspect
3054 and 3056 Marine Generator Sets Cooling System Coolant (DEAC) - Change
3512B and 3512C Engines For Caterpillar Built Machines Hydraulic Starting System
3054 and 3056 Marine Generator Sets Cooling System Coolant (ELC) - Change
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1811 Generator through 144-1951 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 147-9437 Generator through 147-9497 Generator
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
3054 and 3056 Marine Generator Sets Overhaul Considerations
3054 and 3056 Marine Generator Sets Walk-Around Inspection
3054 and 3056 Marine Generator Sets Reference Material