Fuel Filter Lines
Show/hide table
 | |
| Illustration 1 | g00822688 |
Typical Example Left Side of Engine | |
(1) Fuel inlet port
(2) Fuel inlet connection
- Tighten the connector to the following torque: ... 5 ± 2 N·m (44 ± 18 lb in)
(3) Tube assembly (fuel transfer pump to fuel filter)
(4) Tube assembly (fuel from tank)
(5) Tube assembly (fuel filter to fuel gallery)
(6) Fitting (fuel return to tank)
(7) The fuel pressure regulator valve maintains minimum fuel system pressure. The valve should meet the following specifications:
- Minimum pressure at low idle ... 400 kPa (58 psi)
- Horizontal position ... ±2°
Note: Refer to the System Operation, Testing and Adjusting, "Fuel Pressure" for the correct method of inspecting fuel pressure.
(8) Cylinder head
(9) Fuel gallery
(10) Fuel outlet (return to tank)
Caterpillar Information System:
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Rating Definitions
Generator Set Start Module Electrical Connections
3054 and 3056 Marine Generator Sets Engine Crankcase Breather - Clean/Replace
SPS343 Skid Mounted Pumper Product Lifting
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Operation
3408E and 3412E Industrial Engines Analog Sensor Supply Circuit - Test
3408E and 3412E Industrial Engines System Overview
Generator Set Start Module Mounting
C-15 and C-16 Industrial Engines Maintenance Interval Schedule - C-16
G3406 Engine Valve Lash and Valve Bridge Adjustment
SBF214 and SUF557 Skid Mounted Power Packs Product Lifting
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203} Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
SPS343 Skid Mounted Pumper Cooling System Coolant Level - Check
G3406 Engine Crankshaft Position for Valve Lash Setting
2007/01/29 Coolant Recommendation for 3618 Engines {1350, 1352, 1395}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel - Inspect
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Gear Group - Inspect
3054 and 3056 Marine Generator Sets Cooling System Coolant (DEAC) - Change
3512B and 3512C Engines For Caterpillar Built Machines Hydraulic Starting System
3054 and 3056 Marine Generator Sets Cooling System Coolant (ELC) - Change
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1811 Generator through 144-1951 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 147-9437 Generator through 147-9497 Generator
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
3054 and 3056 Marine Generator Sets Overhaul Considerations