Crankshaft Position for Valve Lash Setting
The SAE standard engine crankshaft rotation is counterclockwise when the crankshaft is viewed from the flywheel end.
Show/hide table
Illustration 1 | g00495276 |
Cylinder and valve locations (A) Inlet valves (B) Exhaust valves |
Show/hide table
Crankshaft Positions for Valve Lash Setting Standard Counterclockwise Rotation     |
|||
Engine     | Stroke for the Number 1 Piston at Top Center Position (1)     | Inlet Valves     |
Exhaust Valves     |
G3412C     | Compression     | 1-3-4-6-7-12     | 1-4-5-8-9-12     |
Exhaust | 2-5-8-9-10-11     | 2-3-6-7-10-11     | |
Firing order | 1-4-9-8-5-2-11-10-3-6-7-12     |
Show/hide table
( 1 ) | Put the No. 1 Piston at the top center (TC) position and identify the correct stroke. Refer to Testing And Adjusting, "Finding the Top Center Position for the The No 1 Piston". Find the top center (TC) position for a particular stroke and make the adjustment for the correct cylinders. Remove the timing bolt. Turn the flywheel by 360 degrees in the direction of normal engine rotation. This will put the No. 1 piston at the top center (TC) position on the other stroke. Install the timing bolt in the flywheel and complete the adjustments for the cylinders that remain. |
Caterpillar Information System:
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6883-03, "G3408C and G3412C Engines" {7450}
G3408C and G3412C Engines Crankshaft Position for Valve Lash Setting
Automatic Transfer Switches CTS, CTSD Series Engine Control Connections of the Controller
3054, 3054B and 3056 Marine Engines Maintenance Interval Schedule - 3054B Marine Naturally Aspirated
Generator Set Start Module System Schematic
3126 Truck Engine Military Cylinder Head - Install
3126 Truck Engine Military Cylinder Head - Remove
3024C Engine for Caterpillar Built Machines Engine Oil Relief Valve
SPS343 Skid Mounted Pumper Junction Box
2001/10/01 Oil Condition Will Affect The Operation of The HEUI Fuel System {1348, 1714}
Automatic Transfer Switches CTS, CTSD Series Functional Test of the Transfer Switch
SPT343 Truck Mounted Pumper Universal Remote Control Console
3126B Industrial Engines System Configuration Parameters
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Shutoff Solenoid
G3408C and G3412C Engines Carburetor - Adjust
3024C Engine for Caterpillar Built Machines Glow Plugs
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6682-04, "G3408 and G3412 Engines" {7450}
3024C Engine for Caterpillar Built Machines Flywheel Housing
G3408C and G3412C Engines Gas Pressure
SBF214 and SUF557 Skid Mounted Power Packs Gauges and Indicators - 24 Volt
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6359-03, "G3406 Engine" {7450}
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6356-01, "G3304 and G3306 Engines" {7450}
3054 and 3056 Marine Generator Sets Model View Illustrations