Engine Oil Relief Valve
Show/hide table
 | |
| Illustration 1 | g00820218 |
Note: When the engine oil relief valve is installed, ensure that all components are clean. Lightly lubricate all components with clean engine oil.
Pressure to open engine oil relief valve ... 352 to 448 kPa (51.1 to 65.0 psi)
(1) O-ring
A new O-ring should be used when the engine oil relief valve is installed.
(2) Tighten the engine oil relief valve to the following torque. ... 64 N·m (47 lb ft)
Note: Always remove the engine oil relief valve before removing the crankshaft. Damage to the engine oil relief valve or damage to the crankshaft may occur.
Caterpillar Information System:
SPS343 Skid Mounted Pumper Junction Box
2001/10/01 Oil Condition Will Affect The Operation of The HEUI Fuel System {1348, 1714}
Automatic Transfer Switches CTS, CTSD Series Functional Test of the Transfer Switch
SPT343 Truck Mounted Pumper Universal Remote Control Console
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Pressure Switch
SPS343 Skid Mounted Pumper Reference Material
Automatic Transfer Switches CTG, CTGD Series Transfer Switch - Test
Automatic Transfer Switches CTG, CTGD Series Transfer Mechanism - Lubricate
G3408C and G3412C Engines Measuring Inlet Manifold Temperature
HDB Series and M1 Series Heavy Duty Brushless Alternators Charging System
G3406 Engine Restriction of Air Inlet and Exhaust
G3408C and G3412C Engines Engine Speed/Timing Sensor
3126 Truck Engine Military Cylinder Head - Remove
3126 Truck Engine Military Cylinder Head - Install
Generator Set Start Module System Schematic
3054, 3054B and 3056 Marine Engines Maintenance Interval Schedule - 3054B Marine Naturally Aspirated
Automatic Transfer Switches CTS, CTSD Series Engine Control Connections of the Controller
G3408C and G3412C Engines Crankshaft Position for Valve Lash Setting
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6883-03, "G3408C and G3412C Engines" {7450}
G3408C and G3412C Engines Crankshaft Position for Valve Lash Setting
3126B Industrial Engines System Configuration Parameters
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Shutoff Solenoid
G3408C and G3412C Engines Carburetor - Adjust
3024C Engine for Caterpillar Built Machines Glow Plugs