C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Caterpillar


Flywheel

Usage:

CB-214E 214


Illustration 1g00820355

(1) Heat the flywheel ring gear to the following temperature. ... 120 ° to 150 ° C (248 ° to 302 ° F)

Note: If excessive wear is not present, remove the ring gear and install the ring gear at 90 degrees from the original position. Heat the ring gear evenly.

(2) Tighten the flywheel bolts to the following torque. ... 74 N·m (55 lb ft)

Maximum flywheel runout ... 0.20 mm (0.008 inch)

Caterpillar Information System:

3024C Engine for Caterpillar Built Machines Glow Plugs
G3408C and G3412C Engines Carburetor - Adjust
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Shutoff Solenoid
3126B Industrial Engines System Configuration Parameters
G3408C and G3412C Engines Crankshaft Position for Valve Lash Setting
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6883-03, "G3408C and G3412C Engines" {7450}
G3408C and G3412C Engines Crankshaft Position for Valve Lash Setting
Automatic Transfer Switches CTS, CTSD Series Engine Control Connections of the Controller
3054, 3054B and 3056 Marine Engines Maintenance Interval Schedule - 3054B Marine Naturally Aspirated
Generator Set Start Module System Schematic
3126 Truck Engine Military Cylinder Head - Install
3126 Truck Engine Military Cylinder Head - Remove
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6682-04, "G3408 and G3412 Engines" {7450}
3024C Engine for Caterpillar Built Machines Flywheel Housing
G3408C and G3412C Engines Gas Pressure
SBF214 and SUF557 Skid Mounted Power Packs Gauges and Indicators - 24 Volt
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6359-03, "G3406 Engine" {7450}
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6356-01, "G3304 and G3306 Engines" {7450}
3054 and 3056 Marine Generator Sets Model View Illustrations
3024C Engine for Caterpillar Built Machines Connecting Rod Bearing Journal
3054 and 3056 Marine Generator Sets Generator Set Description
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 166-2651 Generator through 166-2689 Generator
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter (Primary)
SBF214 and SUF557 Skid Mounted Power Packs Junction Box
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.