Connecting Rod Bearing Journal
Show/hide table
 | |
| Illustration 1 | g00820847 |
(1) Tighten the connecting rod nuts to the following torque. ... 52 N·m (38 lb ft)
(2) Connecting rod bearing cap
(3) Connecting rod bearing
- Standard clearance ... 0.035 to 0.085 mm (0.0014 to 0.0034 inch)
- Service limit ... 0.20 mm (0.008 inch)
Axial clearance between the crankshaft and the connecting rod
- Standard clearance ... 0.01 mm to 0.3 mm (0.004 to 0.01 inch)
- Service limit ... 0.7 mm (0.03 inch)
(4) Connecting rod journal
Show/hide table
| Diameter of the Connecting Rod Journal | ||
| Connecting rod bearings | Diameter of the connecting rod journal | Service limit of the connecting rod journal |
| Standard | 51.964 to 51.975 mm (2.0458 to 2.0463 inch) |
51.90 mm (2.043 inch) |
If the clearance between the bearing and piston pin is not within the tolerance, one or both components must be replaced.
Caterpillar Information System:
3054 and 3056 Marine Generator Sets Model View Illustrations
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6356-01, "G3304 and G3306 Engines" {7450}
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6359-03, "G3406 Engine" {7450}
SBF214 and SUF557 Skid Mounted Power Packs Gauges and Indicators - 24 Volt
G3408C and G3412C Engines Gas Pressure
3024C Engine for Caterpillar Built Machines Flywheel Housing
2001/09/01 Corrections To Operation and Maintenance Manual, SEBU6682-04, "G3408 and G3412 Engines" {7450}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Flywheel
3024C Engine for Caterpillar Built Machines Glow Plugs
G3408C and G3412C Engines Carburetor - Adjust
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Shutoff Solenoid
3126B Industrial Engines System Configuration Parameters
3054 and 3056 Marine Generator Sets Generator Set Description
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 166-2651 Generator through 166-2689 Generator
3408E and 3412E Engines for Caterpillar Built Machines Fuel Filter (Primary)
SBF214 and SUF557 Skid Mounted Power Packs Junction Box
2001/09/01 Remanufactured Caterpillar 3161 Governors Are Available For 3600 Diesel Engines {1289}
784C and 785C Off-Highway Truck/Tractors Roading the Machine
2001/09/01 The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
3512B Marine Auxiliary Engine General Information
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor Solenoid - Test
325D and 329D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Sensor Open/Short Test
3024C Engine for Caterpillar Built Machines Main Bearing Journal