Illustration 1 | g00459336 |
Camshaft gear and bearings |
(1) Key for shaft and gear
(2) Camshaft
(3) Bearing
(4) Spacers
(5) Gear for tachometer
(6) Spacer
(7) Camshaft gear with governor
(8) Hub
Note: For information on the backlash of the camshaft gear, refer to Specifications, "Gear Group (Front)".
Lifters
- Diameter of the lifters ...
17.960 mm to 17.980 mm (0.70709 inch to 0.70787 inch)
- Diameter of the bore in the cylinder block for the lifters ...
18.000 mm to 18.018 mm (0.70866 inch to 0.70937 inch)
- Maximum clearance between the lifters and the cylinder block ...
0.058 mm (0.0023 inch) - Repair limit ...
0.080 mm (0.0031 inch) - Repair limit ...
Illustration 2 | g00295323 |
(A) Actual lobe lift
(B) Height of the camshaft lobe
(C) Base circle
To determine the lobe lift, use the procedure that follows:
- Measure the camshaft lobe height (B).
- Measure the base circle (C).
- Subtract the base circle that is found in Step 2 from the camshaft lobe height that is found in Step 1. The difference is the actual camshaft lobe lift.
Illustration 3 | g00819857 |
Camshaft lobe lift
(1) Camshaft lobe for inlet and exhaust valves
- Diameter of camshaft lobe for the inlet and exhaust valves ...
34.453 mm to 34.507 mm (1.3564 inch to 1.3585 inch) - Maximum service limit of camshaft lobe for the inlet and exhaust valves ...
33.7 mm (1.33 inch) - Maximum service limit of camshaft lobe for the inlet and exhaust valves ...
(2) Camshaft lobe for the fuel injection pump
- Diameter of camshaft lobe for the fuel injection pump ...
41.940 mm to 42.060 mm (1.6512 inch to 1.6559 inch) - Maximum service limit of camshaft lobe for the fuel injection pump ...
41.8 mm (1.65 inch) - Maximum service limit of camshaft lobe for the fuel injection pump ...
(3) Camshaft eccentric for the fuel transfer pump
- Diameter of the camshaft eccentric for the fuel transfer pump ...
31.900 mm to 32.000 mm (1.2559 inch to 1.2598 inch) - Maximum service limit of camshaft eccentric for the fuel transfer pump ...
30.0 mm (1.18 inch) - Maximum service limit of camshaft eccentric for the fuel transfer pump ...
Retainer Plate for the Camshaft
Illustration 4 | g00819901 |
(4) Tighten the setscrews for the retainer plate for the camshaft to the following torque. ...
(5) Retainer plate for the camshaft
(6) Camshaft gear