G3408C and G3412C Engines Caterpillar


Crankshaft

Usage:

G3408C 3WR



图 1g02350792

典型实例

(1) 曲轴

(2) 止推片

(3) 主轴承

(4) 曲轴齿轮

(5) 曲轴油封和承磨衬套

气缸燃烧产生的功率通过连杆传递给曲轴 (1) 。 曲轴将活塞的往复运动转换成旋转扭矩,以便驱动从动设备。

中间主轴承 (3) 侧面的两个止推片 (2) 控制曲轴的端隙。 8 缸发动机有五个主轴承,12 缸发动机有七个主轴承。 加压的发动机机油通过缸体壁板中的钻道供应到所有主轴承。 这些发动机机油流经曲轴中的钻道,以润滑连杆轴承。

曲轴两端使用了液力油封和承磨衬套 (5) 。 发动机机油由唇形密封进行密封,承磨衬套有助于防止曲轴的磨损。 油封和承磨衬套能够方便部件的更换,有助于降低发动机的维护成本。

压装在曲轴前部的曲轴齿轮 (4) 驱动正时齿轮和机油泵。

减振器安装在曲轴前部,以减少扭振(扭曲),避免损坏发动机部件。

Caterpillar Information System:

G3408C and G3412C Engines Camshaft
G3612 and G3616 Engines Air Starting Motor Pressure Regulating Valve
3034 Engine for Caterpillar Built Machines Fuel System - Prime - Remove Air from the Fuel System
Operating Instructions for Program Storage Device{0709} Operating Instructions for Program Storage Device{0709}
3024C Engine for Caterpillar Built Machines Cylinder Head Valves
3500B Engines Vibration Damper
Automatic Transfer Switches CTS, CTSD Series Transfer Switch Operation
2001/08/01 Corrections To Operation And Maintenance Manual, SEBU7150-01, "Maintenance Section" , "Overhaul (Top End)" {7595}
HDB Series and M1 Series Heavy Duty Brushless Alternators Regulator - Test
3024C Engine for Caterpillar Built Machines Rocker Shaft
3046 Engine for Caterpillar Built Machines Electric Starting System - Test
3024C Engine for Caterpillar Built Machines Valve Mechanism Cover
3024C Engine for Caterpillar Built Machines Camshaft
SPT343 Truck Mounted Pumper Manual Stop Procedure
2001/09/01 Revised Service Manual, RENR4911 , "Exhaust Temperature Scanner" {7451, 7466}
3512B Marine Auxiliary Engine Air Inlet and Exhaust Lines
G3406 Engine General Information (Fuel System)
G3408C and G3412C Engines General Information (Electronic Control System)
SPS343 Skid Mounted Pumper Plate Locations and Film Locations
G3408C and G3412C Engines Ignition System
G3408C and G3412C Engines Manifold Air Pressure Sensor
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Lines
Automatic Transfer Switches CTG, CTGD Series Transfer Switch - Inspect
Automatic Transfer Switches CTG, CTGD Series Switch Contact - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.