Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g01093847 |
(1) Engine oil line
(2) Washers
Note: The washers must be replaced with new washers when the engine oil line is removed.
(3) Tighten the banjo bolts to the following torque. ...
Caterpillar Information System:
G3408C and G3412C Engines Manifold Air Pressure Sensor
G3408C and G3412C Engines Ignition System
SPS343 Skid Mounted Pumper Plate Locations and Film Locations
G3408C and G3412C Engines General Information (Electronic Control System)
G3406 Engine General Information (Fuel System)
3512B Marine Auxiliary Engine Air Inlet and Exhaust Lines
2001/09/01 Revised Service Manual, RENR4911 , "Exhaust Temperature Scanner" {7451, 7466}
SPT343 Truck Mounted Pumper Manual Stop Procedure
3024C Engine for Caterpillar Built Machines Camshaft
G3408C and G3412C Engines Crankshaft
G3408C and G3412C Engines Camshaft
G3612 and G3616 Engines Air Starting Motor Pressure Regulating Valve
Automatic Transfer Switches CTG, CTGD Series Transfer Switch - Inspect
Automatic Transfer Switches CTG, CTGD Series Switch Contact - Inspect
G3408C and G3412C Engines Detonation Sensor
G3408C and G3412C Engines Engine Speed/Timing Sensor
G3406 Engine Restriction of Air Inlet and Exhaust
HDB Series and M1 Series Heavy Duty Brushless Alternators Charging System
G3408C and G3412C Engines Measuring Inlet Manifold Temperature
Automatic Transfer Switches CTG, CTGD Series Transfer Mechanism - Lubricate
Automatic Transfer Switches CTG, CTGD Series Transfer Switch - Test
SPS343 Skid Mounted Pumper Reference Material
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Pressure Switch
SPT343 Truck Mounted Pumper Universal Remote Control Console