Fuel System - Prime
Show/hide table
 |
Cedera atau bahkan kematian dapat terjadi akibat kelalaian dalam mematuhi prosedur berikut. Bahan bakar yang bocor atau tertumpah pada permukaan yang panas atau pada komponen listrik dapat menyebabkan kebakaran. Bersihkan semua kebocoran atau tumpahan bahan bakar. Jangan merokok sambil bekerja pada sistem bahan bakar. Putar sakelar pemutus hubungan baterai ke posisi OFF atau lepaskan sambungan baterai sewaktu mengganti filter bahan bakar. |
- Buka kap engine.
- Longgarkan ventilasi udara (1) pada filter bahan bakar sekunder (3) .
Show/hide table
 | |
| Ilustrasi 1 | g02719558 |
(1) Ventilasi udara (2) Ventilasi udara (3) Filter bahan bakar sekunder (4) Filter bahan bakar ketiga (5) Plunger pompa priming | |
Catatan: Untuk informasi mengenai penampungan tumpahan cairan, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Informasi Bahaya yang Umum".
- Putar plunger pompa priming (5) berlawanan arah putaran jarum jam. Putar plunger hingga terbuka. Operasikan plunger pompa priming.
- Kencangkan ventilasi udara (1) saat aliran bahan bakar bebas dari gelembung udara.
- Longgarkan ventilasi udara (2) pada filter bahan bakar ketiga (4) .
- Operasikan plunger pompa priming (5) .
- Kencangkan ventilasi udara (2) saat aliran bahan bakar bebas dari gelembung udara.
- Dorong plunger (5) masuk dan putar plunger searah putaran jarum jam.
Caterpillar Information System:
320D and 323D Excavators Circuit Breakers - Reset
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install
320D and 323D Excavators Fuel System Fourth Filter - Replace - If Equipped
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Remove
312E Excavator Systems Main Hydraulic System
320E RR Excavator Machine Systems Main Control Valve - Remove and Install
3516C Generator Sets Gauges and Indicators
2011/12/09 The Torsion Springs for the Engine Hood have been Improved on the 336E Excavator {7251}
2012/11/21 A New Multi Bend Hose is Now Used on Certain 330D and 336D Excavators and Mobile Hydraulic Power Units {5057}
316E Excavator Systems Specifications
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
320D and 323D Excavators Plate Locations and Film Locations
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
320D and 323D Excavators Lifting Capacities
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Radiator Core - Clean
3516C Generator Sets Symbols
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
2011/09/19 Improvements have been Made on the Fan Pulley for Certain 336E Excavators {1384}
Center-Lock Pin Grabber Coupler Work Tool Quick Coupler