3516C Generator Sets Caterpillar

Symbols

Usage:

General Symbols

Show/hide table




Illustration 1	g01168026
The control panel and modules utilize International Graphic Symbols to identify functions. A typical list of the symbols that are used is shown above.

Aftertreatment Symbols

Show/hide table

Container - Air - Filling - Compressed air in from source.

Show/hide table

Container - Air - Draining/Emptying - Compressed air out to the DEF injector.

Show/hide table

Urea Fill Container - Urea in from the storage or day tank.

Show/hide table

Urea - Out to Injector - Urea out to the DEF injector.

Show/hide table

Urea - Vent/Overflow Container - Urea vent/overflow.

Show/hide table

Urea Pump - A green light indicates that the DEF dosing pump is operating.

Show/hide table

Urea Pump - Failure/Malfunction - A yellow light indicates that a warning alarm has been received. The dosing pump is operating.

Show/hide table

Urea Pump - Off/Inactive - A red light indicates that the system has received a shutdown event. The dosing pump has stopped.

Show/hide table

Input/Output - Connection of the engine ECM and the communication adaptor.

Show/hide table

DC Cabinet On/Off - Dosing cabinet on/off switch. Located near main system disconnect switch.

Show/hide table

Voltage - 110V - 50/60Hz - Film that indicates electrical specifications.

Caterpillar Information System:

320D and 323D Excavators Radiator Core - Clean

Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary

320D and 323D Excavators Lifting Capacities

2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}

2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install

320D and 323D Excavators Plate Locations and Film Locations

320D and 323D Excavators Fuel System - Prime

320D and 323D Excavators Circuit Breakers - Reset

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install

320D and 323D Excavators Fuel System Fourth Filter - Replace - If Equipped

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install

2011/09/19 Improvements have been Made on the Fan Pulley for Certain 336E Excavators {1384}

Center-Lock Pin Grabber Coupler Work Tool Quick Coupler

374D Excavator Adjustable Gauge Undercarriage Frame

320D and 323D Excavators Monitoring System

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install

320D and 323D Excavators Cooling System Coolant Sample (Level 1) - Obtain

312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove

C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Install