Engine Oil Relief Valve - Remove and Install
开始:
- 拆下发动机机油滤清器。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下适配器 (1)。
Show/hide table
被弹簧力爆出的零件击中，会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序，并使用所有建议的工具以释放弹簧力。
Show/hide table
图 2 g02720291 - 拆下安全阀组件 (2)。
Show/hide table
图 3 g02720293 - 使用尖嘴钳从壳体上拆下套筒 (3)。 从安全阀孔上拆下钢珠 (4) 和弹簧 (5)。
Show/hide table
| |
| 图 1 | g02720288 |
- 按照与拆卸相反的顺序安装发动机机油安全阀。
注: 确保所有部件清洁、无磨损或损坏。 如有必要，更换所有磨损或损坏的部件。 如果壳体上的安全阀孔磨损或损坏，必须更换整个安全阀组件。
Caterpillar Information System:
320D and 323D Excavators Monitoring System
374D Excavator Adjustable Gauge Undercarriage Frame
Center-Lock Pin Grabber Coupler Work Tool Quick Coupler
2011/09/19 Improvements have been Made on the Fan Pulley for Certain 336E Excavators {1384}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
3516C Generator Sets Symbols
320D and 323D Excavators Radiator Core - Clean
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Lifting Capacities
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
320D and 323D Excavators Cooling System Coolant Sample (Level 1) - Obtain
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
320E RR Excavator Machine Systems Swing Motor and Swing Drive - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
320E RR Excavator Machine Systems Swing Motor and Swing Drive - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Idler Gear - Remove and Install
G310B, G315B, G320B, and G325B Demolition and Sorting Grapples Mounting Bracket - Remove and Install
320D and 323D Excavators Specifications
320E RR Excavator Machine Systems Swing Motor - Remove