Inlet and Exhaust Valve Guides - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 387-1311 | 气门导管冲头组件 | 1 |
开始:
- 拆下进气门和排气门。
Show/hide table
| 注意 |
|---|
|
必须由经过正规培训的专业人员拆卸气门导管和气门座。 还需要使用专用机械设备。 有关更多信息，请咨询授权 Caterpillar 代理商。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下进气门和排气门密封件 (1)。 使用工具 (A) 将气门导管 (2) 从缸盖 (3) 上拆下。
- 有关其余的气门导管，请重复步骤 1。
Show/hide table
| |
| 图 1 | g02720116 |
- 按与拆卸相反的顺序安装进气门和排气门导管 (2)。
- 使用工具 (A) 安装进气门和排气门导管 (2)。
注: 确保缸盖清洁且无机加工碎屑。 清洁缸盖的原有孔并润滑新的气门导管。
Caterpillar Information System:
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
3516C Generator Sets Symbols
320D and 323D Excavators Radiator Core - Clean
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Lifting Capacities
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
320D and 323D Excavators Plate Locations and Film Locations
320D and 323D Excavators Fuel System - Prime
320D and 323D Excavators Circuit Breakers - Reset
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
2011/09/19 Improvements have been Made on the Fan Pulley for Certain 336E Excavators {1384}
Center-Lock Pin Grabber Coupler Work Tool Quick Coupler
374D Excavator Adjustable Gauge Undercarriage Frame
320D and 323D Excavators Monitoring System
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
320D and 323D Excavators Cooling System Coolant Sample (Level 1) - Obtain
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
320E RR Excavator Machine Systems Swing Motor and Swing Drive - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install