Fuel Injection Lines - Remove and Install
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
注: 在所有管组件上标出识别标记，以方便安装。 塞住所有的管路和管组件，以防止受到污染。
- 将燃油供应转到断开位置。
Show/hide table
图 1 g02719969 - 如有必要，拆下卡箍组件 (3)。
- 将喷油管 (1) 和 (2) 从发动机和喷油泵上拆下。
- 立即使用合适的盖塞住喷油泵的开口。
- 按与拆卸相反的顺序安装喷油管。
- 将喷油管固定螺母拧紧至扭矩
15-24 N·m (11-18 lb ft) 。
- 将喷油管固定螺母拧紧至扭矩
Caterpillar Information System:
3516C Generator Sets Symbols
320D and 323D Excavators Radiator Core - Clean
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Lifting Capacities
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
320D and 323D Excavators Plate Locations and Film Locations
320D and 323D Excavators Fuel System - Prime
320D and 323D Excavators Circuit Breakers - Reset
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
2011/09/19 Improvements have been Made on the Fan Pulley for Certain 336E Excavators {1384}
Center-Lock Pin Grabber Coupler Work Tool Quick Coupler
374D Excavator Adjustable Gauge Undercarriage Frame
320D and 323D Excavators Monitoring System
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
320D and 323D Excavators Cooling System Coolant Sample (Level 1) - Obtain
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea General Information
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Connecting Rod Bearings - Install
320E RR Excavator Machine Systems Swing Motor and Swing Drive - Remove