320D and 323D Excavators Caterpillar


Fuel System Fourth Filter - Replace - If Equipped

Usage:

320D GC JZA

------ PERINGATAN! ------

Cedera atau bahkan kematian dapat terjadi akibat kelalaian dalam mematuhi prosedur berikut.

Bahan bakar yang bocor atau tertumpah pada permukaan yang panas atau pada komponen listrik dapat menyebabkan kebakaran.

Bersihkan semua kebocoran atau tumpahan bahan bakar. Jangan merokok sambil bekerja pada sistem bahan bakar.

Putar sakelar pemutus hubungan baterai ke posisi OFF atau lepaskan sambungan baterai sewaktu mengganti filter bahan bakar.



    PERHATIAN

    Putar sakelar pemutus hubungan baterai ke posisi OFF atau lepaskan sambungan baterai sewaktu melakukan penggantian filter bahan bakar.

    Jangan mengisi filter dengan bahan bakar sebelum melakukan pemasangan filter. Bahan bakar yang terkontaminasi akan mempercepat keausan pada komponen-komponen sistem bahan bakar.


    Catatan: Untuk informasi mengenai penampungan tumpahan cairan, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Informasi Bahaya yang Umum".




    Ilustrasi 1g02719167

  1. Lepaskan filter.

    Catatan: Selalu buang filter bekas sesuai peraturan setempat.

  1. Bersihkan dudukan filter. Pastikan bahwa semua seal filter yang lama telah diambil.

  1. Tambahkan bahan bakar diesel yang bersih ke seal filter bahan bakar baru.

  1. Pasang filter bahan bakar yang baru dan kencangkan dengan tangan hingga seal filter bahan bakar menyentuh dudukan pemasangan filter.

    Catatan: Petunjuk pemasangan filter tercetak di bagian samping masing-masing filter Caterpillar. Untuk filter non Caterpillar, rujuk ke petunjuk pemasangan yang disediakan oleh pemasok filter.

    Catatan: Anda dapat menggunakan kunci tipe strap Caterpillar, atau alat lain yang sesuai, untuk memutar filter sebanyak yang diperlukan untuk pemasangan akhir. Jangan sampai alat pemasangan merusak filter.

  1. Pancing sistem bahan bakar. Untuk petunjuk, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Sistem Bahan Bakar - Priming".

  1. Tutup kap engine.

Caterpillar Information System:

C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Remove
312E Excavator Systems Main Hydraulic System
320E RR Excavator Machine Systems Main Control Valve - Remove and Install
3516C Generator Sets Gauges and Indicators
2011/12/09 The Torsion Springs for the Engine Hood have been Improved on the 336E Excavator {7251}
2012/11/21 A New Multi Bend Hose is Now Used on Certain 330D and 336D Excavators and Mobile Hydraulic Power Units {5057}
316E Excavator Systems Specifications
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
318E Excavator Systems Automatic Travel Speed Control - Test
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
Stiff-Link Thumbs Safety Messages
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
320D and 323D Excavators Circuit Breakers - Reset
320D and 323D Excavators Fuel System - Prime
320D and 323D Excavators Plate Locations and Film Locations
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
320D and 323D Excavators Lifting Capacities
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Radiator Core - Clean
3516C Generator Sets Symbols
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.