The Torsion Springs for the Engine Hood have been Improved on the 336E Excavator {7251}
- Excavator:
- 336E (S/N: YEP1-UP; BZY1-UP)
Description of Change: The torsion springs for the engine hood have been improved. The new design reduces the amount of friction against the side plate by adding a roller and a rail. The improved torsion springs should provide a quieter operation when opening and closing the engine hood.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g02721336 |
Torsion springs | |
Show/hide table
 | |
| Illustration 2 | g02722929 |
Show/hide table
 | |
| Illustration 3 | g02722930 |
Detail J from Illustration 2 (1) 382-8630 Roller (3) 385-2311 Support As (4) 385-2314 Spring | |
Show/hide table
 | |
| Illustration 4 | g02722931 |
Detail L from Illustration 2 (1) 382-8630 Roller (2) 385-2310 Support As (3) 385-2326 Spring | |
Show/hide table
| Improved Parts | |||
|---|---|---|---|
| Qty | New Part | Part Name | Former Part |
| 2 | 382-8630 | Roller | |
| 1 | 385-2310 | Support As | 339-7329 |
| 1 | 385-2311 | Support As | 339-7332 |
| 1 | 385-2314 | Spring | 356-8929 |
| 1 | 385-2326 | Spring | 356-8929 |
Show/hide table
| Effectivity and Adaptability of Improved Torsion Spring | ||
|---|---|---|
| Model | Effectivity | Adaptability |
| 336E | S/N:YEP252-UP | S/N:YEP1-251 |
| S/N:BZY896-UP | S/N:BZY1-895 | |
Caterpillar Information System:
2012/11/21 A New Multi Bend Hose is Now Used on Certain 330D and 336D Excavators and Mobile Hydraulic Power Units {5057}
316E Excavator Systems Specifications
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
318E Excavator Systems Automatic Travel Speed Control - Test
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
Stiff-Link Thumbs Safety Messages
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
2011/09/14 Change in Hydraulic Oil Recommendations for the 345D Excavators Operating in Cold Ambient Conditions {5095, 7581}
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3516C Generator Sets Gauges and Indicators
320E RR Excavator Machine Systems Main Control Valve - Remove and Install
312E Excavator Systems Main Hydraulic System
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Remove
320D and 323D Excavators Fuel System Fourth Filter - Replace - If Equipped
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
320D and 323D Excavators Circuit Breakers - Reset
320D and 323D Excavators Fuel System - Prime
320D and 323D Excavators Plate Locations and Film Locations
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}