Engine Oil Pump - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-2321 | 拉拔器组件 | 1 |
开始:
- 拆卸前壳体。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 拆下螺母 (1) 和垫圈。
Show/hide table
图 2 g02718965 - 使用工具 (A) 拆下齿轮 (2)。
Show/hide table
图 3 g02718966 - 拆下螺栓 (3 )。 拆下发动机油泵 (4) 和密封垫。
Show/hide table
| |
| 图 1 | g02718964 |
Caterpillar Information System:
312E Excavator Systems Main Hydraulic System
320E RR Excavator Machine Systems Main Control Valve - Remove and Install
3516C Generator Sets Gauges and Indicators
2011/12/09 The Torsion Springs for the Engine Hood have been Improved on the 336E Excavator {7251}
2012/11/21 A New Multi Bend Hose is Now Used on Certain 330D and 336D Excavators and Mobile Hydraulic Power Units {5057}
316E Excavator Systems Specifications
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
318E Excavator Systems Automatic Travel Speed Control - Test
3512E Tier 4 Final Engines for Land Electric Drilling Inlet Manifold Temperature Sensor
C13, C15, and C18 Generator Set Engines Engine Oil Temperature Sensor
Stiff-Link Thumbs Safety Messages
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474} Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
320D and 323D Excavators Fuel System Fourth Filter - Replace - If Equipped
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump - Install
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068} 204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
320D and 323D Excavators Circuit Breakers - Reset
320D and 323D Excavators Fuel System - Prime
320D and 323D Excavators Plate Locations and Film Locations
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
2011/09/22 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 302.5C Mini Hydraulic Excavator {5057}
2011/09/29 An Improved Hose and Clamps are Now Used for the Return Lines Group on the 301.6C and 301.8C Mini Hydraulic Excavators {5057}
320D and 323D Excavators Lifting Capacities
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Glossary
320D and 323D Excavators Radiator Core - Clean