3054, 3054B and 3056 Marine Engines Caterpillar


Control Panel

Usage:

3056 CKS

Main Control Panel




Illustration 1g00755359

(1) High coolant temperature lamp

(2) Coolant temperature gauge

(3) Warning lamp for water in fuel

(4) Panel illumination switch

(5) No charge warning lamp

(6) Voltmeter

(7) Tachometer

(8) Service hour meter

(9) Heat/Start switch

(10) On/Off switch

(11) Low oil pressure lamp

(12) Oil pressure gauge

(13) Engine stop switch

The main control panel is for single engine installations and twin engine installations. More than one control panel can be used in a vessel. Refer to the Installation Manual for information on the installation and the configuration of the main control panel.

Auxiliary Control Panel




Illustration 2g00755360

(1) Tachometer

(2) Low oil pressure lamp

(3) High coolant temperature lamp

(4) Low voltage warning lamp

(5) Service hour meter

(6) On/Off switch

(7) Heat/Start switch

(8) Engine stop switch

The auxiliary control panel is used for control of the engine at a different location. More than one control panel can be used in a vessel. The auxiliary control panel can be used as a main control panel if the vessel is not equipped with a main control panel. Refer to the Installation Manual for information on the installation and the configuration of the auxiliary control panel.

Caterpillar Information System:

C-9 Engines for Caterpillar Built Machines Alternator - Test
C-9 Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
3054, 3054B and 3056 Marine Engines Fuel Filter Base
Marine Monitoring System II Resistance Temperature Detector Module
3054, 3054B and 3056 Marine Engines Emissions Certification Film
2001/01/01 New Engine Pressure Sensors are Available {1917, 1923, 1925}
C-10, C-12, C-15 and C-16 Industrial Engines E017 High Engine Coolant Temperature Warning
C-10, C-12, C-15 and C-16 Industrial Engines Event Codes
3126B Industrial Engines CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Industrial Engines CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Industrial Engines CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Industrial Engines CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3054, 3054B and 3056 Marine Engines Engine Oil Cooler
Marine Monitoring System II Input Module and Output Module - Replace
3054 and 3056 Industrial and Generator Set Engines Alternator Mounting
2000/12/01 Marine Power Display is Available {7490}
2000/11/01 Revised Coolant Recommendations For Gas Engines {1350, 1352, 1395}
3054 and 3056 Marine Generator Sets Alarm Switches
3054, 3054B and 3056 Marine Engines Stopping the Engine
C-10, C-12, C-15 and C-16 Industrial Engines System Configuration Parameters
3054, 3054B and 3056 Marine Engines Manual Stop Procedure
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Flash Programming
3054, 3054B and 3056 Marine Engines Emergency Procedures
2001/07/01 New Tightening Procedure for Connecting Rod Bolts in 3600, G3600, and C280 Engines {1218, 1225}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.