Fuel Filter Base
Show/hide table
 | |
| Illustration 1 | g00756607 |
Typical example | |
(1) Banjo bolt
- Tighten the banjo bolt to the following torque. ... 9.5 N·m (84 lb in)
(2) Washers
Install new sealing washers when the banjo bolt is removed. Do not reuse the original sealing washers.
(3) Bolt
- Tighten the bolts to the following torque. ... 28 ± 7 N·m (21 ± 5 lb ft)
Caterpillar Information System:
Marine Monitoring System II Resistance Temperature Detector Module
3054, 3054B and 3056 Marine Engines Emissions Certification Film
2001/01/01 New Engine Pressure Sensors are Available {1917, 1923, 1925}
C-10, C-12, C-15 and C-16 Industrial Engines E017 High Engine Coolant Temperature Warning
C-10, C-12, C-15 and C-16 Industrial Engines Event Codes
3126B Industrial Engines CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Industrial Engines CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Industrial Engines CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Industrial Engines CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Industrial Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Industrial Engines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3054 and 3056 Marine Generator Set Engines Crankshaft Gear - Remove and Install
C-9 Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
C-9 Engines for Caterpillar Built Machines Alternator - Test
3054, 3054B and 3056 Marine Engines Control Panel
3054, 3054B and 3056 Marine Engines Engine Oil Cooler
Marine Monitoring System II Input Module and Output Module - Replace
3054 and 3056 Industrial and Generator Set Engines Alternator Mounting
2000/12/01 Marine Power Display is Available {7490}
2000/11/01 Revised Coolant Recommendations For Gas Engines {1350, 1352, 1395}
3054 and 3056 Marine Generator Sets Alarm Switches
3054, 3054B and 3056 Marine Engines Stopping the Engine
C-10, C-12, C-15 and C-16 Industrial Engines System Configuration Parameters
3054, 3054B and 3056 Marine Engines Manual Stop Procedure