Injection Actuation Pressure Control Valve - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-0333 | Crowfoot Wrench | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tool (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten the injection actuation pressure control valve (1) to a torque of
50 ± 5 N·m (37 ± 4 lb ft) . - Install solenoid valve (4), spacer (5), and nut (3) on the injection actuation pressure control valve (1). Tighten nut (3) to a torque of
5.5 ± 1.5 N·m (49 ± 13 lb in) . - Reconnect wiring harness plug (2) to the injection actuation pressure control valve (1).
Show/hide table
| |
| Illustration 1 | g00762946 |
Caterpillar Information System:
3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Assemble
3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Disassemble
3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Remove
3126B and 3126E On-highway Engines Fuel Filter Base - Install
3126B and 3126E On-highway Engines Fuel Filter Base - Remove
3054, 3054B and 3056 Marine Engines Cooling System Coolant (DEAC) - Change
3054, 3054B and 3056 Marine Engines Turbocharger - Remove
G3406 Engine Cylinder Liner Projection
3054, 3054B and 3056 Marine Engines Water Outlet Manifold - Remove
3054, 3054B and 3056 Marine Engines Cylinder Head - Remove - 3056 Engine
2000/10/01 New Combustion Feedback Cable Assembly Helps Prevent Moisture Damage {1563}
3126B Industrial Engine Flywheel
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Symbols
G3408C and G3412C Engines Engine Crankcase Pressure (Blowby) - Test
G3304 and G3306 Engines Compression
3054, 3054B and 3056 Marine Engines Aftercooler - Remove
3054, 3054B and 3056 Marine Engines Cooling System Coolant (ELC) - Change
3054 and 3056 Marine Generator Sets Cooling System Coolant Level - Check
G3304 and G3306 Engines Connecting Rod - Inspect
G3304 and G3306 Engines Connecting Rod Bearings - Inspect
C-9 Engines for Caterpillar Built Machines Connecting Rod
C-10, C-12, C-15 and C-16 Industrial Engines Maintenance Due Lamp Circuit - Test
3054, 3054B and 3056 Marine Engines Engine Air Cleaner Element - Clean/Replace
G3304 and G3306 Engines Vibration Damper - Check