3126B and 3126E On-highway Engines Caterpillar


Injection Actuation Pressure Control Valve - Disassemble

Usage:

3126B 1AJ

Disassembly Procedure



    Illustration 1g00762956
    (4) Solenoid valve
    (5) Spacer
    (6) Nut

  1. Remove O-ring seals (3) and (2), and backup ring (1) from the injection actuation pressure control valve. Inspect the components of the injection actuation pressure control valve for wear or damage. If any part is worn or damaged, use a new part for replacement.

Caterpillar Information System:

3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Remove
3126B and 3126E On-highway Engines Fuel Filter Base - Install
3126B and 3126E On-highway Engines Fuel Filter Base - Remove
3054, 3054B and 3056 Marine Engines Cooling System Coolant (DEAC) - Change
3054, 3054B and 3056 Marine Engines Turbocharger - Remove
G3406 Engine Cylinder Liner Projection
3054, 3054B and 3056 Marine Engines Water Outlet Manifold - Remove
3054, 3054B and 3056 Marine Engines Cylinder Head - Remove - 3056 Engine
2000/10/01 New Combustion Feedback Cable Assembly Helps Prevent Moisture Damage {1563}
3126B Industrial Engine Flywheel
C7 Engines for Caterpillar Built Machines Water Pump
Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467} Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467}
3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Assemble
3126B and 3126E On-highway Engines Injection Actuation Pressure Control Valve - Install
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Symbols
G3408C and G3412C Engines Engine Crankcase Pressure (Blowby) - Test
G3304 and G3306 Engines Compression
3054, 3054B and 3056 Marine Engines Aftercooler - Remove
3054, 3054B and 3056 Marine Engines Cooling System Coolant (ELC) - Change
3054 and 3056 Marine Generator Sets Cooling System Coolant Level - Check
G3304 and G3306 Engines Connecting Rod - Inspect
G3304 and G3306 Engines Connecting Rod Bearings - Inspect
C-9 Engines for Caterpillar Built Machines Connecting Rod
C-10, C-12, C-15 and C-16 Industrial Engines Maintenance Due Lamp Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.