Gauges and Indicators
Show/hide table
 | |
| Illustration 1 | g00716644 |
Gauges provide an indication of the performance of the pumper. Ensure that the gauges are in good working order. Determine the normal operating range by observing the gauges over a period of time.
Noticeable changes in gauge readings can indicate potential gauge or engine problems. Problems may also be indicated by gauge readings that change even if the readings are within specifications. Determine and correct the cause of any significant change in the readings. Consult your Caterpillar dealer for assistance.
Caterpillar Information System:
3508B Industrial Engine with an ADEM 2 Electronic Control Module Emergency Stop Switch (Remote)
3524B Engines for 797 and 797B Off-Highway Trucks Crankcase Pressure
2000/06/01 Special Instruction, REHS0589-01, "Emergency Stop Circuit Improvement for the Electronic Instrument Panel to Control Engine Restart" is Available {7451}
3500B and 3500B High Displacement Generator Set Engines Measuring Inlet Manifold Pressure
3608 Engine Air Prelube Pump Lubricator Bowl - Clean
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>7E-0097</B> Generator through <B>7E-9695</B> Generator
3408E and 3412E Engines for Caterpillar Built Machines Pinion Clearance - Adjust
3608 Engine Generator Oil Level - Check
3608 Engine Generator Oil Filter - Change
Programmable Relay Control Module (PRCM) Display Codes
C175-16 Locomotive Engine Checking Engine Cylinders with an Electronic Service Tool
3608 Engine Generator Oil - Change
3406E, C-10 and C-12 Truck Engines Severe Service Application - Check
Programmable Relay Control Module (PRCM) Electrical Connector - Inspect
3500 Engines For Caterpillar Built Power Modules Engine Oil Pressure is Low
Programmable Relay Control Module (PRCM) Connector Contact Identification
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>7W-1877</B> Generator through <B>7W-8825</B> Generator
3608 Engine Air Prelube Pump Lubricator Oil Level - Check
Programmable Relay Control Module (PRCM) Glossary of Terms
Payload Control System (PCS) 2.X Wiring Harness (Open Circuit) - Test
C9 On-highway Engines Fuel System Primary Filter - Replace
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0 Wiring Harness (Short Circuit) - Test
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor
G3516B Engines Engine Speed/Timing Sensor