Bucket - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
C     | 5P-0960     | 润滑脂筒     | 1     |
D     | 276-8833     | 销冲头盖     | 1     |
E     | 276-8834     | 销冲头盖     | 1     |
- 检查 O 形密封圈的状况。 如果有任何 O 形密封圈损坏,则用新零件更换。
- 将薄薄的一层工具 (C) 涂抹到法兰 (11) 的外机加工表面上。 将薄薄的一层工具 (C) 涂抹到法兰 (11) 的孔中。 将法兰 (11) 安装在铲斗中。
Show/hide table
图 1 | g00890198 |
Show/hide table
图 2 | g01197257 |
注: 安装法兰 (11) ,使定位销 (15) 位于螺栓孔 (16) 之间。
- 在斗杆销孔处的每个铲斗法兰上临时安装 O 形密封圈(未显示)。 起动发动机,将斗杆降到铲斗内直到销孔彼此互相对齐。 关闭发动机。
Show/hide table
图 3 | g00889666 |
- 确保销组件 (10) 端部的螺纹拉拔器孔清洁。 将一薄层工具 (C) 涂覆到销组件 (10) 上。 使用适当的起吊设备安置铲斗销 (10) 。 销 (10) 的重量约为 59 kg (130 lb)。 使用工具 (D) 和适当的锤子安装铲斗销 (10) 。
Show/hide table
图 4 | g01197258 |
- 安装板 (13) 和垫片 (12) 。 安装并均匀地拧紧螺栓 (12) 。
Show/hide table
图 5 | g00890207 |
- 向一侧移动铲斗,直到铲斗接触斗杆为止。 测量在法兰 (11) 处铲斗与斗杆之间的间隙。 记录该尺寸。 添加或减少板 (13) 和法兰 (11) 之间的垫片 (12) ,使斗杆和铲斗之间的间隙 (X) 在 0.5 mm (0.02 in) 和 1.0 mm (0.04 in) 之间。
- 如果增减了垫片,则重新安装板 (13) 。 安装螺栓 (14) 。 均匀拧紧螺栓 (14) 。
- 安置盘 (9) ,安装螺栓 (8) 。
Show/hide table
图 6 | g00889682 |
- 将 O 形密封圈 (7) 从斗杆和铲斗间的销接头滑到铲斗法兰上。
Show/hide table
图 7 | g00884879 |
- 将 O 形密封圈 (3) 从铲斗和连杆组件 (4) 间的销接头滑到铲斗法兰上。
Show/hide table
图 8 | g00884729 |
- 确保销组件 (6) 端部的螺纹拉拔器孔清洁。 将工具 (C) 涂敷到销组件 (6) 的表面。 使用适当的起吊设备安置销组件 (6) 。 销组件 (6) 的重量约为 75 kg (165 lb)。 使用工具 (E) 和适当的锤子安装销组件 (6) 。
Show/hide table
图 9 | g01197261 |
- 定位板 (2) ,然后安装螺栓 (1) 。
Show/hide table
图 10 | g00884725 |
- 将 O 形密封圈 (3) 滑到铲斗和连杆组件之间的销接头上。
Caterpillar Information System:
365C Excavator Machine Systems Bucket - Remove
365C Excavator Machine Systems Bucket Linkage - Install
365C Excavator Machine Systems Bucket Linkage - Remove
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Remove
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Assemble - Three Stage Cylinder and Four Stage Cylinder
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Disassemble - Three Stage Cylinder and Four Stage Cylinder
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
365C Excavator Machine Systems Bucket Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Relief Valve (Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
330D and 336D Excavators Radiator Core - Clean
3500 Engines for Caterpillar Built Machines Engine Coolant Temperature Sensor
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Crankshaft Vibration Damper and Pulley - Install
336D2 and 340D2 Excavators Bucket Linkage - Lubricate - TB Bucket Family
336D2 and 340D2 Excavators Bucket Linkage - Lubricate - DB Bucket Family
320D Excavator Fuel Transfer Pump (Refueling) - If Equipped
H140D S, H160D S and H180D S Hydraulic Hammers Tool - Inspect
H140D S, H160D S and H180D S Hydraulic Hammers Tool Bushing (Lower) - Inspect/Replace
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fan Drive - Remove