Swing Drive - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7574     | 连杆支架     | 2     |
B     | -     | 顶出螺钉 M24 x 3 x 125 mm     |
2     |
开始:
- 拆下回转马达。 请参阅拆解和组装, "回转马达 - 拆卸"。
- 将回转驱动的机油排入适当的容器以便保存或处理。 请参阅操作和保养手册, "回转驱动油 - 更换"。
- 拆下螺栓 (1) 。
Show/hide table
图 1 | g01196904 |
- 将工具 (A) 和适当的起吊设备连接到回转驱动 (2) 。 回转驱动 (2) 的重量约为 290 kg (640 lb)。
Show/hide table
图 2 | g01196905 |
- 拆下塞子 (3) ,然后安装工具 (B) 。 力度均匀地拧紧工具 (B) ,以从主机架上分离回转驱动 (2) 。
- 使用工具 (A) 和适当的起吊设备拆下回转驱动 (2) 。
Caterpillar Information System:
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Assemble - Three Stage Cylinder and Four Stage Cylinder
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Ejector Cylinder - Disassemble - Three Stage Cylinder and Four Stage Cylinder
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Remove
365C Excavator Machine Systems Main Control Valve - Assemble - Right Travel, Left Travel, and Stick
365C Excavator Machine Systems Main Control Valve - Disassemble - Right Travel, Left Travel, and Stick
365C Excavator Machine Systems Main Control Valve - Assemble - Manifold Valve
365C Excavator Machine Systems Main Control Valve - Disassemble - Manifold Valve
365C Excavator Machine Systems Main Control Valve - Assemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Disassemble - Proportional Valve
365C Excavator Machine Systems Main Control Valve - Assemble - Attachment, Bucket, and Boom
365C Excavator Machine Systems Main Control Valve - Disassemble - Attachment, Bucket, and Boom
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Assemble
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
365C Excavator Machine Systems Bucket Linkage - Remove
365C Excavator Machine Systems Bucket Linkage - Install
365C Excavator Machine Systems Bucket - Remove
365C Excavator Machine Systems Bucket - Install
365C Excavator Machine Systems Bucket Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Relief Valve (Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Solenoid Valve (Travel Speed) - Remove and Install