Radiator Core - Clean
Show/hide table
 |
|
空氣壓力會造成人員受傷。 造成人員受傷不含以下的部分程序。 當使用壓力空氣時，應穿戴防護面罩和防護服。 清潔用的噴嘴處，其最大空氣壓力必須小於 |
- 打開機器左側的檢修門。
Show/hide table
插圖 1 g01197146 - 找到散熱器 (1)。
- 檢查所有的芯子飛邊是否存在碎屑。
- 清除所有芯子飛邊和濾網中的灰塵和碎屑。
建議使用壓縮氣體，但也可以使用高壓水流或蒸汽來清除芯子上的灰塵與一般碎屑。
請參閱特別出版品, SEBD0518, "冷卻系統須知"，瞭解更多有關清潔芯子飛邊的詳細資訊。
- 關閉檢修門。
Caterpillar Information System:
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Relief Valve (Pilot) - Remove and Install
365C Excavator Machine Systems Bucket Cylinder - Remove and Install
365C Excavator Machine Systems Bucket - Install
365C Excavator Machine Systems Bucket - Remove
365C Excavator Machine Systems Bucket Linkage - Install
365C Excavator Machine Systems Bucket Linkage - Remove
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
365C Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Swing Drive - Disassemble
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
3500 Engines for Caterpillar Built Machines Engine Coolant Temperature Sensor
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Crankshaft Vibration Damper and Pulley - Install
336D2 and 340D2 Excavators Bucket Linkage - Lubricate - TB Bucket Family
336D2 and 340D2 Excavators Bucket Linkage - Lubricate - DB Bucket Family
320D Excavator Fuel Transfer Pump (Refueling) - If Equipped
H140D S, H160D S and H180D S Hydraulic Hammers Tool - Inspect
H140D S, H160D S and H180D S Hydraulic Hammers Tool Bushing (Lower) - Inspect/Replace
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fan Drive - Remove
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Lifting Capacities
C7 Engines for Caterpillar Built Machines Piston and Rings
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fan Drive - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Stick Lines - Quick Coupler