Approved Work Tools
A Moil tool or a chisel is used for breaking concrete and rock. An asphalt chisel or a parallel spade tool is used for breaking light concrete, bricks, asphalt, and frozen soil.
Commonly used tools for the hammer include the following:
- Moil tool
- Chisel
- Long Chisel
- 127 mm (5 inch) Asphalt Chisel
- 76.2 mm (3 inch) Asphalt Chisel
- 127 mm (5 inch) Parallel Spade Tool
- Blunt Tool
- Transverse Spade Tool
- Pyramid Point Tool
Contact your dealer concerning specific work tools that are approved for this machine. This list was complete at the time of publication. There may be additional tools that have been approved since that time.
Caterpillar Information System:
PP120 and PH126 Power Pack and Hammer Specifications
PP120 and PH126 Power Pack and Hammer Operation
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Install - In-Chassis
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pump Coupling
S320B, S325B, S340B, S365B and S385B Demolition Shears Hydraulic Rotator and Shear Housing - Separate
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Remove - In-Chassis
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition Shears Mounting Bracket - Remove and Install
302.5C Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
3406C Engines for Caterpillar Built Machines Engine Oil Pump
PP120 and PH126 Power Pack and Hammer Plate Locations and Film Locations
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Hydraulic Lockout) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Priming Pump - Remove and Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Work Tool Control
C7 and C9 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Transfer Pump - Remove and Install
C7.1 Engines for Caterpillar Built Machines Flywheel Housing
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
416E Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate