CID 0174 FMI 03 Fuel Temperature open/short to +batt
Kondisi-kondisi yang mendorong penciptaan kode ini:
Modul Kontrol Elektronik (ECM, Electronic Control Module) mendeteksi tegangan sinyal dari sensor yang berada di atas normal.
Tanggapan:
ECM akan mencatat kode diagnostik. ECM memberikan tanda pada temperatur bahan bakar sebagai data yang tidak valid dan temperatur bahan bakar ditetapkan ke nilai default.
Kemungkinan Akibat Perlaksanaan:
- Tidak ada efek pada kinerja.
Pemecahan Masalah:
Langkah Pengujian" status="1 1.
Hasil:
- OK - BERHENTI
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Remove - In-Chassis
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition Shears Mounting Bracket - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
M318C and M322C Excavators Machine Systems Stabilizer Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Steering Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
Installing the 266-8480 Temperature Control Kit (Manual) on 300 Series B Excavators{7304, 7320} Installing the 266-8480 Temperature Control Kit (Manual) on 300 Series B Excavators{7304, 7320}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Equipment Lowering with Engine Stopped
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Joystick Controls Alternate Patterns
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
S320B, S325B, S340B, S365B and S385B Demolition Shears Hydraulic Rotator and Shear Housing - Separate
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pump Coupling
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Install - In-Chassis
PP120 and PH126 Power Pack and Hammer Operation
PP120 and PH126 Power Pack and Hammer Specifications
PP120 and PH126 Power Pack and Hammer Approved Work Tools
302.5C Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect