PP120 and PH126 Power Pack and Hammer Caterpillar


Specifications

Usage:

PP120 ETB

Intended Use

The Power Pack is a self-contained power source. The Power Pack provides hydraulic flow and pressure in order to operate compatible tools. The most common tool is a hand-held hydraulic hammer.

The Hammer works in conjunction with a hydraulic power source. Use the hammer in order to break up concrete, cut asphalt, and dig heavy clay soil. Use the hammer for other similar applications.

Application/Configuration Restrictions

Refer to "Machine Data" below for information about maximum weight for the power pack and for the hammer.

This machine is approved for use in environments with no explosive gases.

Machine Data

The general specifications and technical data are listed for the power pack and the hammer.

Table 1
Power Pack    
Height    
630 mm (24.8 inches)    
Width    
525 mm (20.6 inches)    
Length    
730 mm (28.7 inches)    
Weight    
77 kg (169.8 lb)    
Hydraulic Oil Flow    
20 L (5.2 US gal) per minute    
Hydraulic Oil Pressure    
12000 kPa (1740 psi)    
Hydraulic Oil Pressure (Max)    
15000 kPa (2176 psi)    
Measured Sound Power Level     Lwa 99 dB    
Guaranteed Sound Level     Lwa 101 dB    

Table 2
Hammer    
Height    
750 mm (29.5 inches)    
Width    
130 mm (5.1 inches)    
Length    
450 mm (17.7 inches)    
Weight    
26 kg (57.3 lb)    
Hydraulic Oil Flow (Min/Max)    
20 L (5.2 US gal) per minute    
Working Pressure (Min/Max)     10500/12500 kPa (1523/1813 psi)    
Accumulator Charge    
5000 kPa (725 psi)    
Size of Tool (Standard)     Hex Size
32 mm (1.25 inches) AF Length
160 mm (6.3 inches)    
Measured Sound Power Level     Lwa 106 dB    
Guaranteed Sound Level     Lwa 108 dB    
Vibration Level (1)    
3.1 m/s2 (10.2 ft/s2)    
( 1 ) The vibration level is measured according to "ISO8662-5 (H/A)".

Note: The sound level meets the standard "European Directive 2000/14/EC" and "ISO 3744".

Caterpillar Information System:

PP120 and PH126 Power Pack and Hammer Operation
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Install - In-Chassis
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pump Coupling
S320B, S325B, S340B, S365B and S385B Demolition Shears Hydraulic Rotator and Shear Housing - Separate
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Remove - In-Chassis
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition Shears Mounting Bracket - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
PP120 and PH126 Power Pack and Hammer Approved Work Tools
302.5C Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
3406C Engines for Caterpillar Built Machines Engine Oil Pump
PP120 and PH126 Power Pack and Hammer Plate Locations and Film Locations
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Hydraulic Lockout) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Priming Pump - Remove and Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Work Tool Control
C7 and C9 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Transfer Pump - Remove and Install
C7.1 Engines for Caterpillar Built Machines Flywheel Housing
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.