325D and 329D Excavators and 325D Material Handler Machine System Specifications Caterpillar


Pump Coupling

Usage:

325D L A3R



图 1g01406569

注: 组装前,用 154-9731 螺纹固定剂涂抹螺栓 。

(1) 8 只螺栓的扭矩 ... 49 ± 5 N·m (36 ± 4 lb ft)

注: 必须安装泵联轴器总成,使毂与泵轴端平齐。 可将 6V-4876 润滑剂 涂抹在泵轴花键上来辅助组装。

(2) 毂的扭矩 ... 240 ± 20 N·m (177 ± 15 lb ft)

Caterpillar Information System:

S320B, S325B, S340B, S365B and S385B Demolition Shears Hydraulic Rotator and Shear Housing - Separate
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
C15 and C18 Engines for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Remove - In-Chassis
VHS-30/3, VHS-40/3, VHS-50/3, VHS-60/3 and VHS-70/3 Demolition Shears Mounting Bracket - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
M318C and M322C Excavators Machine Systems Stabilizer Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems Steering Cylinder - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Separate
Installing the 266-8480 Temperature Control Kit (Manual) on 300 Series B Excavators{7304, 7320} Installing the 266-8480 Temperature Control Kit (Manual) on 300 Series B Excavators{7304, 7320}
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Cylinder Head - Install - In-Chassis
PP120 and PH126 Power Pack and Hammer Operation
PP120 and PH126 Power Pack and Hammer Specifications
PP120 and PH126 Power Pack and Hammer Approved Work Tools
302.5C Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Upper Frame and Undercarriage Frame - Connect
3406C Engines for Caterpillar Built Machines Engine Oil Pump
PP120 and PH126 Power Pack and Hammer Plate Locations and Film Locations
302.5C Mini Hydraulic Excavator Machine Systems Solenoid Valve (Hydraulic Lockout) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Fuel Priming Pump - Remove and Install
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Work Tool Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.