Check Valve (Cooler Bypass) - Install
Installation Procedure
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install new O-ring seal (11) into check valve (9) .
Show/hide table
Illustration 1 | g01176993 |
- Install check valve (9) .
Show/hide table
Illustration 2 | g01176895 |
Show/hide table
Illustration 3 | g01176890 |
- Install bolts (8). Tighten bolts (7). Install bolts (10) and connect tubes (6). Position block (5) and install bolts (4) .
- Install panel (3) .
Show/hide table
Illustration 4 | g01176889 |
- Install panel (2) and guard (1) .
Show/hide table
Illustration 5 | g01176887 |
- Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".
Caterpillar Information System:
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Assemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Disassemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Remove
2005/06/13 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
322C Excavator Specifications
325D Forest Machine Hydraulic System Main Hydraulic Pump
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Check
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Install
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Install
324D and 326D Excavators Boom/Stick/Bucket Combinations
345C Excavator Automatic Lubrication System General Information
345C Excavator Automatic Lubrication System Lubrication Pump
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
345C Excavator Automatic Lubrication System Lubrication Distribution Valve
C175 Generator Sets High Pressure Fuel Lines
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter