Check Valve (Cooler Bypass) - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove guard (1) and panel (2) .
Show/hide table
 | |
| Illustration 1 | g01176887 |
- Remove panel (3) .
Show/hide table
 | |
| Illustration 2 | g01176889 |
- Drain the hydraulic system into a suitable container for storage or disposal.
- Remove bolts (4) and position block (5) aside. Disconnect tubes (6) and remove bolts (10). Loosen bolts (7). Remove bolts (8) .
Show/hide table
 | |
| Illustration 3 | g01176890 |
Show/hide table
 | |
| Illustration 4 | g01176895 |
- Remove check valve (9) .
- Remove O-ring seal (11) from check valve (9) .
Show/hide table
 | |
| Illustration 5 | g01176993 |
Caterpillar Information System:
2005/06/13 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
322C Excavator Specifications
325D Forest Machine Hydraulic System Main Hydraulic Pump
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Check
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Install
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit Boom/Stick/Bucket Combinations
2005/06/13 An Improved Butt Weld Reduces Internal Stress on the Boom {6501}
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Disassemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Assemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Install
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Install
324D and 326D Excavators Boom/Stick/Bucket Combinations
345C Excavator Automatic Lubrication System General Information
345C Excavator Automatic Lubrication System Lubrication Pump
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
345C Excavator Automatic Lubrication System Lubrication Distribution Valve