Specifications
Ditch Cleaning Configuration
Show/hide table
 | |
| Illustration 1 | g01176876 |
Show/hide table
| 320C L Excavator (1) | |
|---|---|
| Approximate Weight | 27950 kg (61619 lb) |
| Overall Length (A) | 14300 mm (46 ft 10 inch) |
| Overall Height (B) | 3200 mm (10 ft 5 inch) |
| Height of Cab (C) | 2950 mm (9 ft 7 inch) |
| Overall Width (D) | 2980 mm (9 ft 8 inch) |
| Track Shoe Width (E) | 800 mm (2 ft 7 inch) |
Show/hide table
| ( 1 ) | These specifications are for a machine that has a 10.2 m (33.46 ft) boom, a 7.86 m (25 ft 9 inch) stick, a 0.1 m3 (0.131 yd3) bucket, and a 10 percent full fuel tank. |
Working Ranges
Ditch Cleaning Configuration
Show/hide table
 | |
| Illustration 2 | g01176875 |
Show/hide table
| 320C L Excavator (1) | |
|---|---|
| Maximum reach at ground level (A) | 17.95 m (58 ft 10 inch) |
| Maximum digging depth (B) | 14.32 m (46 ft 11 inch) |
| Maximum cutting height (C) | 13.84 m (45 ft 5 inch) |
| Maximum loading height (D) | 12.34 m (40 ft 5 inch) |
| Minimum loading height (E) | 1.77 m (5 ft 9 inch) |
Show/hide table
| ( 1 ) | The ditch cleaning configuration includes the following parts: special linkage, standard upper frame, long undercarriage, 4100 kg (9040 lb) counterweight, 10.2 m (33.46 ft) boom, 7.86 m (25 ft 9 inch) stick, 800 mm (2.0 ft 7 inch) track shoe and 0.1 m3 bucket. |
Caterpillar Information System:
325D Forest Machine Hydraulic System Main Hydraulic Pump
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Install - 1-Way/2-Way, Check
325C LCR Excavator Machine Systems Solenoid Valve (Auxiliary Circuit) - Remove - 1-Way/2-Way, Check
C13, C15, and C18 Tier 4 Final Engines Fuel Transfer Pump
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Swivel - Install
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit Boom/Stick/Bucket Combinations
2005/06/13 An Improved Butt Weld Reduces Internal Stress on the Boom {6501}
325D and 329D Excavators Hydraulic System Boom Drift Reduction Valve
2005/06/13 The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit Specifications
2005/06/13 Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Remove
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Disassemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Assemble
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Install
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Install
324D and 326D Excavators Boom/Stick/Bucket Combinations
345C Excavator Automatic Lubrication System General Information
345C Excavator Automatic Lubrication System Lubrication Pump