Hydraulic Tank and Filter
Show/hide table
图 1 | g01341123 |
(19) 回油滤清器
(25) 液压油箱 (34) 滤芯 (35) 回油室 (36) 油箱室 (37) 吸油滤清器 (38) 管路 (39) 吸入管路 (40) 孔口 (41) 安全阀 (42) 油道 |
液压油冷却器的回油经过孔口 ( 40) 和油道 (42) 流向回油室 ( 35)。
回油滤清器 (19) 由滤芯 ( 34) 和安全阀 (41) 组成。 回油滤清器安装在液压油箱后表面。
回油经过回油滤清器 ( 19) 的滤芯 (34)。 然后,回油经过管路 ( 38) 流向液压油箱 (25 )。 此后,机油流过吸油滤清器 ( 37),并经过吸油管 ( 39) 输送至泵。
Show/hide table
图 2 | g01341124 |
(43) 通风装置 |
通风装置 (43) 位于液压油箱上表面。 通风装置可防止液压油箱中空气压力升高或降低,并且不受以下环境影响:
- 由于油缸移动引起液压油箱中的空气压力变化。
- 由于温度变化引起液压油箱中的空气压力变化。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C175 Generator Sets High Pressure Fuel Lines
345C Excavator Automatic Lubrication System Lubrication Distribution Valve
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
345C Excavator Automatic Lubrication System Lubrication Pump
345C Excavator Automatic Lubrication System General Information
324D and 326D Excavators Boom/Stick/Bucket Combinations
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Remove
C13, C15, and C18 Tier 4 Final Engines Crankshaft Seals
325C LCR Excavator Machine Systems Check Valve (Cooler Bypass) - Install
365C Material Handler Fire Extinguisher Location
365C Material Handler Operator Controls
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Install
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
345C Excavator Automatic Lubrication System Automatic Lubrication System
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pump Drive Coupling - Remove and Install
385C Material Handler Lifting Capacities
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Fan Guard - Clean/Inspect - If Equipped
325C LCR Excavator Machine Systems Swivel - Remove
325C LCR Excavator Machine Systems Swivel - Install
2005/06/13 Correction to Specification , " Axle (Rear)" {3013, 3278, 3282, 4004}
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove