Correction to Specification , " Axle (Rear)" {3013, 3278, 3282, 4004}
- Excavator:
- M318 (S/N: 8AL1-UP)
Replace the information with the following information.
Show/hide table
Illustration 1 | g00359572 |
(1) Torque for 36 bolts ... 280 N·m (207 lb ft)
(2) Torque for four bolts ... 55 N·m (41 lb ft)
(3) Torque for two nuts ... 1500 ± 100 N·m (1106 ± 74 lb ft)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the nut.
Note: The axial clearance is 0.5 to 2.0 mm (0.02 to 0.08 inch).
Caterpillar Information System:
325C LCR Excavator Machine Systems Swivel - Install
325C LCR Excavator Machine Systems Swivel - Remove
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Fan Guard - Clean/Inspect - If Equipped
385C Material Handler Lifting Capacities
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pump Drive Coupling - Remove and Install
345C Excavator Automatic Lubrication System Automatic Lubrication System
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Main Hydraulic Pump and Gear Pump (Pilot) - Install
365C Material Handler Operator Controls
365C Material Handler Fire Extinguisher Location
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Hydraulic System
385C Material Handler Specifications
325C LCR Excavator Machine Systems Evaporator Coil - Remove
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Install
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Boom Hydraulic System
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Cab - Remove
325C LCR Excavator Machine Systems Evaporator Coil - Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}