Cab - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 4     |
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Reposition floor mat (1) .
Show/hide table
Illustration 1 | g01177899 |
- Remove bolts (2) .
Show/hide table
Illustration 2 | g01177923 |
- Remove duct assembly (3) .
Show/hide table
Illustration 3 | g01177931 |
- Remove knob (5) and the nut. Remove switch assemblies (6) and disconnect the harnesses.
Show/hide table
Illustration 4 | g01177977 |
- Remove duct assembly (4) .
- Disconnect harness assembly (8) and hose (7) .
Show/hide table
Illustration 5 | g01178185 |
- Open the engine access doors.
- Disconnect harness assembly (9) .
Show/hide table
Illustration 6 | g01178198 |
- Disconnect harness assembly (10). Remove bolts (11) .
Show/hide table
Illustration 7 | g01178221 |
- Install Tooling (A) and a suitable lifting device to cab (12). The weight of cab (12) is approximately 181 kg (400 lb). Remove cab (12) .
Show/hide table
Illustration 8 | g01178080 |
Caterpillar Information System:
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Boom Hydraulic System
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Install
325C LCR Excavator Machine Systems Evaporator Coil - Remove
385C Material Handler Specifications
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Hydraulic System
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove
2005/06/13 Correction to Specification , " Axle (Rear)" {3013, 3278, 3282, 4004}
325C LCR Excavator Machine Systems Swivel - Install
325C LCR Excavator Machine Systems Swivel - Remove
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Fan Guard - Clean/Inspect - If Equipped
325C LCR Excavator Machine Systems Evaporator Coil - Install
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
325C LCR Excavator Machine Systems Counterweight - Remove and Install
324D Excavator Hydraulic System Return Hydraulic System
M318C and M322C Wheeled Excavators Power Train Tire and Rim - Remove - Type II
M318C and M322C Wheeled Excavators Power Train Tire and Rim - Install - Type II
Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056} Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056}
302.5C Mini Hydraulic Excavator Machine Systems Cab - Install
M318C and M322C Wheeled Excavators Power Train Final Drive Carriers, Hubs and Brakes - Disassemble - Rear Axle
M318C and M322C Wheeled Excavators Power Train Final Drive Carriers, Hubs and Brakes - Assemble - Rear Axle
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor