Cab - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 4     |
- Install Tooling (A) and a suitable lifting device to cab (12) and position cab (12). The weight of cab (12) is approximately 181 kg (400 lb).
Show/hide table
Illustration 1 | g01178080 |
- Install bolts (11). Connect harness assembly (10) .
Show/hide table
Illustration 2 | g01178221 |
- Connect harness assembly (9) .
Show/hide table
Illustration 3 | g01178198 |
- Close the engine access doors.
- Connect harness assembly (8) and hose (7) .
Show/hide table
Illustration 4 | g01178185 |
- Install duct assembly (4) .
Show/hide table
Illustration 5 | g01177977 |
- Install switch assemblies (6) and connect the harnesses. Install knob (5) and the nut.
- Install duct assembly (3) .
Show/hide table
Illustration 6 | g01177931 |
- Install bolts (2) .
Show/hide table
Illustration 7 | g01177923 |
- Position floor mat (1) .
Show/hide table
Illustration 8 | g01177899 |
Caterpillar Information System:
Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056} Filtration Procedure for Hydraulic Oil in Compact Equipment {0680, 0768, 5050, 5056}
M318C and M322C Wheeled Excavators Power Train Tire and Rim - Install - Type II
M318C and M322C Wheeled Excavators Power Train Tire and Rim - Remove - Type II
324D Excavator Hydraulic System Return Hydraulic System
325C LCR Excavator Machine Systems Counterweight - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
C15 and C18 Engines for Caterpillar Built Machines Gear Group (Front)
325C LCR Excavator Machine Systems Evaporator Coil - Install
302.5C Mini Hydraulic Excavator Machine Systems Cab - Remove
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Disassemble
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Boom Hydraulic System
M318C and M322C Wheeled Excavators Power Train Final Drive Carriers, Hubs and Brakes - Disassemble - Rear Axle
M318C and M322C Wheeled Excavators Power Train Final Drive Carriers, Hubs and Brakes - Assemble - Rear Axle
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor
325C LCR Excavator Machine Systems Final Drive - Disassemble
325C LCR Excavator Machine Systems Swivel - Disassemble
325C LCR Excavator Machine Systems Swivel - Assemble
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor
325C LCR Excavator Machine Systems Manual Valve (Auxiliary Shutoff) - Remove
325C LCR Excavator Machine Systems Manual Valve (Auxiliary Shutoff) - Install
325C LCR Excavator Machine Systems Control Valve (Auxiliary) - Remove
325C LCR Excavator Machine Systems Control Valve (Auxiliary) - Install
C7 and C9 Engines for Caterpillar Built Machines Injector Trim File