Main Hydraulic Pump and Gear Pump (Pilot) - Install
Installation Procedure
Note: Cleanliness is an important factor. Before the assembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position the main hydraulic pump and gear pump (10) and install bolts (9) .
Show/hide table
Illustration 1 | g01177261 |
- Install bolts (8). Connect hose assemblies (7) .
Show/hide table
Illustration 2 | g01177130 |
- Position fuel filler assembly (4). Connect hoses (6) .
Show/hide table
Illustration 3 | g01176992 |
- Connect hose assemblies (2). Connect hose (3) .
Show/hide table
Illustration 4 | g01176991 |
- Position fuel filler assembly (4) and install screws (5) .
- Install cover assembly (1) .
Show/hide table
Illustration 5 | g01176990 |
- Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Caterpillar Information System:
365C Material Handler Operator Controls
365C Material Handler Fire Extinguisher Location
325D and 329D Excavators Hydraulic System Hydraulic Tank and Filter
C9 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C175 Generator Sets High Pressure Fuel Lines
345C Excavator Automatic Lubrication System Lubrication Distribution Valve
Hydraulic Cylinder Honing {7562} Hydraulic Cylinder Honing {7562}
345C Excavator Automatic Lubrication System Lubrication Pump
345C Excavator Automatic Lubrication System General Information
324D and 326D Excavators Boom/Stick/Bucket Combinations
302.5C Mini Hydraulic Excavator Machine Systems Main Control Valve - Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
349F and 352F Excavators Machine System Specifications Travel Counterbalance Valve
345C Excavator Automatic Lubrication System Automatic Lubrication System
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pump Drive Coupling - Remove and Install
385C Material Handler Lifting Capacities
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Fan Guard - Clean/Inspect - If Equipped
325C LCR Excavator Machine Systems Swivel - Remove
325C LCR Excavator Machine Systems Swivel - Install
2005/06/13 Correction to Specification , " Axle (Rear)" {3013, 3278, 3282, 4004}
302.5C Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Swing Hydraulic System
385C Material Handler Specifications
325C LCR Excavator Machine Systems Evaporator Coil - Remove