Correction to Specifications Module, SENR5117-03, "3116 Diesel Truck Engine" {1201}
- Truck Engines:
- 3116 (S/N: 2BK1-UP; 9GK1-UP; 9LN1-UP; 9YN1-UP; 2FR1-UP; 7HS1-UP; 5JZ1-UP)
Callout (15) is the dimension from the centerline of crankshaft bore to the top of block. This dimension should be 322.00 ± 0.17 mm (12.677 ± 0.007 inch).
Caterpillar Information System:
3176C and 3196 Marine Engines Turbocharger - Remove
3500B Engines for Caterpillar Built Power Modules Test for the Water Temperature Regulator
2000/02/07 New Oil Filter Base Group {1306}
Electronic Modular Control Panel II+ (EMCP II+) Normal Mode
3608 Engine Fuel System Operation
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator - Test
3500B Engines Cylinder Head
3608 Engine Sea Water Cooling System Operation
3176C and 3196 Marine Engines Electronic Unit Injector Sleeve - Remove
3176C and 3196 Marine Engines Electronic Unit Injector - Install
723PLUS Digital Speed Control Watch Window PC Interface
723PLUS Digital Speed Control Programmable Parameters
3500 Generator Set Engines Auxiliary Drive Pulley
2000/01/17 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901} Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901}
2000/01/01 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
2000/01/01 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
3176C and 3196 Marine Engines Turbocharger - Install
3176C and 3196 Marine Engines Valve Mechanism Cover - Remove and Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Remove
2000/02/01 Correction To Troubleshooting, SENR5015-00 {1000}
3176C and 3196 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
3176C and 3196 Marine Engines Inlet and Exhaust Valves - Remove and Install
3176C and 3196 Marine Engines Electronic Unit Injector Sleeve - Install