Fuel Transfer Pump (Refueling) - If Equipped
- Remove the fuel tank cap from the top of the fuel tank.
Show/hide table
Bodily injury can occur from unexpected contact with open cab doors on machines equipped with a fixed cab riser. To avoid injury, close the cab door before climbing onto the rear of the machine. |
Show/hide table
Illustration 1 | g00794465 |
- Connect the hose from the fuel pump to the fuel supply.
Note: The hose is located in the tool box.
- Turn the start key to the ON position without starting the engine.
- Raise the left console.
- Depress the button until the pump is actuated.
Note: The pump will automatically shut off after two minutes if there is no change in the fuel level. The pump will automatically shut off when the tank is full. The pump will automatically shut off after eighteen minutes of continuous operation.
Note: Press the button again in order to manually turn off the pump.
Show/hide table
Illustration 2 | g01025134 |
Note: Do not operate the pump without fuel.
- Disconnect the hose. Drain the excess fuel from the hose before you store the hose.
Note: Dispose of drained fluids according to local regulations.
- Install the fuel tank cap.
- Close the access doors.
Caterpillar Information System:
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Tool Box
322C Excavator Machine System Specifications Relief Valve (Line) - Auxiliary
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Power Receptacle
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Battery Disconnect Switch
5110B Excavator Machine Systems Swing Motor - Remove
311C and 314C Excavators Electric and Electronic Monitor - Disassemble
BA22, BA25 and BA30 Angling Brooms General Information
311C and 314C Excavators Electric and Electronic Service Hour Meter Does Not Activate - Troubleshoot
311C and 314C Excavators Electric and Electronic Speed Sensor - Troubleshoot
311C and 314C Excavators Electric and Electronic Speed Sensor - Replace
311C and 314C Excavators Electric and Electronic Starting Motor Does Not Rotate - Troubleshoot
311C and 314C Excavators Electric and Electronic Wiper Motor Does Not Stop - Troubleshoot
5110B Excavator Machine Systems Swing Motor - Install
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Mirror
5230B Excavator Machine Systems Swing Parking Brake - Remove
311C U Excavator Hydraulic System Pilot Valve (Travel and Steering)
311C U Excavator Hydraulic System Travel Motor
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Alternate Exit
5230B Excavator Machine Systems Swing Parking Brake - Install
5110B Excavator Machine Systems Swing Drive - Remove
5110B Excavator Machine Systems Swing Drive - Install
311C U Excavator Hydraulic System Swing Motor
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Window Wiper and Washer Control
325C and 325C L Excavator Stopping the Engine