M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Caterpillar


Power Receptacle

Usage:

M318C BCZ



Illustration 1g00845440

Power Receptacle - A twelve volt power receptacle is located inside the cab next to the storage box. This power receptacle can be used for powering automotive electrical equipment or accessories. Remove the cap before use.




Illustration 2g00898233

Electrical outlet at lower right front of cab

Note: This electric outlet provides current only when the parking lights or head lights are on.




Illustration 3g00898234

Electrical outlet at upper right rear of cab

Note: This electric outlet provides current only when the beacon light is on.

The machine has two twenty-four volt electrical outlet receptacles. These outlets supply power for auxiliary uses. One outlet is positioned at the lower right front of the cab. The other outlet is positioned on the upper right rear of the cab.

In addition, the cigar lighter can serve as a twenty-four volt power receptacle.

Caterpillar Information System:

M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Battery Disconnect Switch
5110B Excavator Machine Systems Swing Motor - Remove
311C and 314C Excavators Electric and Electronic Monitor - Disassemble
BA22, BA25 and BA30 Angling Brooms General Information
311C and 314C Excavators Electric and Electronic Service Hour Meter Does Not Activate - Troubleshoot
311C and 314C Excavators Electric and Electronic Speed Sensor - Troubleshoot
311C and 314C Excavators Electric and Electronic Speed Sensor - Replace
311C and 314C Excavators Electric and Electronic Starting Motor Does Not Rotate - Troubleshoot
311C and 314C Excavators Electric and Electronic Wiper Motor Does Not Stop - Troubleshoot
311C and 314C Excavators Electric and Electronic Wiper Motor Does Not Rotate - Troubleshoot
311C and 314C Excavators Electric and Electronic Window Washer Does Not Activate - Troubleshoot
311C and 314C Excavators Electric and Electronic Travel Pressure Switch - Troubleshoot
322C Excavator Machine System Specifications Relief Valve (Line) - Auxiliary
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Tool Box
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Fuel Transfer Pump (Refueling) - If Equipped
5110B Excavator Machine Systems Swing Motor - Install
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Mirror
5230B Excavator Machine Systems Swing Parking Brake - Remove
311C U Excavator Hydraulic System Pilot Valve (Travel and Steering)
311C U Excavator Hydraulic System Travel Motor
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Alternate Exit
5230B Excavator Machine Systems Swing Parking Brake - Install
5110B Excavator Machine Systems Swing Drive - Remove
5110B Excavator Machine Systems Swing Drive - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.