Engine Oil Filter Base
Show/hide table
| |
| Illustration 1 | g00625215 |
(1) Engine oil filter base
(2) Oil filter bypass valve
(3) Oil cooler bypass valve
Show/hide table
| |
| Illustration 2 | g00824266 |
|
View A-A | |
Show/hide table
| |
| Illustration 3 | g00824267 |
|
View B-B | |
(4) The 9L-9188 Spring is located in the filter bypass valve:
- Outside diameter ...
11.2 mm (0.44 inch) - Free length ...
57.9 mm (2.28 inch) - Assembled length ...
43.2 mm (1.70 inch) - Load at assembled length ...
15.6 ± 1.3 N (3.50 ± 0.30 lb) - Free length ...
(5) Put clean engine oil on the filter seal. Tighten the filter until the seal contacts the base. After the seal contacts the base, rotate the filter by 360 degrees.
Caterpillar Information System:
3114, 3116, and 3126 Engines for Caterpillar Built Machines Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Fuel Shutoff Solenoid - Remove and Install
C-15, C-16 and C-18 Truck Engines Engine Oil Pan - Remove and Install
3512B Marine Auxiliary Engines Crankshaft - Install
3512B Marine Auxiliary Engines Crankshaft - Remove
3512B Marine Auxiliary Engines Camshaft - Install
3512B Marine Auxiliary Engines Camshaft - Remove
3512B Marine Auxiliary Engines Crankshaft Main Bearings - Install
3116 On Highway Engines Exhaust Manifold - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Engine Description
3512B Marine Auxiliary Engine Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3512B Marine Auxiliary Engines Air Screen Housing - Remove and Install
3512B Marine Auxiliary Engines Fumes Filter - Remove and Install
3116 On Highway Engines Crankshaft Main Bearings - Remove
3003, 3013, 3014 and 3024 Industrial Engines Engine Crankcase Breather - Clean
3406E On-Highway Engine Engine Control Module - Remove and Install
30SI Series and 34SI Series Alternator General Information
3003, 3013, 3014 and 3024 Industrial Engines Reference Material
3114, 3116, and 3126 Industrial and Generator Set Engines Safety Signs and Labels
30SI Series and 34SI Series Alternator Normal Operation
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Emergency Stopping
3003, 3013, 3014 and 3024 Industrial Engines Refill Capacities