3003, 3013, 3014 and 3024 Industrial Engines Caterpillar


Reference Material

Usage:

3003 3ZG
The following literature can be obtained through any Caterpillar dealer.

Coolants

  • Special Publication, SEBD0970, "Coolant and Your Engine"

  • Special Publication, PEHP4036, "Data Sheet - Extended Life Coolant"

  • Special Publication, SEBD0518, "Know Your Cooling System"

  • Special Publication, PEEP5027, "Label - ELC Radiator Label"

  • Special Publication, PEHP7057, "Data Sheet - S·O·S Coolant Analysis"

Fuels

  • Special Publication, SEBD0717, "Diesel Fuels and Your Engine"

Lubricants

  • Special Publication, PEHP8038, "Data Sheet - Caterpillar Diesel Engine Oils (DEO) (CH-4, CG-4, CF-4) (North America and Australia)"

  • Special Publication, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations"

  • Special Publication, PEHP7041, "Product Data Sheet for Caterpillar Diesel Engine Oils (DEO)" CG-4 engine oils (International markets)

  • Special Publication, PEWP3014, "Metric Fluids Selector Dial (International)"

  • Special Publication, PEWP9733, "Cat Fluids Selector Dial (North America)"

  • Special Publication, NEDG6022, "Cat Lubricating Grease"

  • Special Publication, PEHP0002, "Molybdenum Grease Data Sheet"

  • Special Publication, NEHP6015, "Data Sheet - Caterpillar Special Purpose Grease"

  • Special Publication, NEHP5621, "How To Select The Right Grease For Any Job"

  • Special Publication, PEHP6001, "How To Take A Good Oil Sample"

  • Special Publication, SEBD0640, "Oil and Your Engine"

  • Special Publications, PEDP7036, "S·O·S Fluids Analysis Cornerstone"

Miscellaneous

  • Service Manual, SENR5045, "3003, 3013, 3014 and 3024 Industrial Engines"

  • Disassembly and Assembly Module, SENR5048, "3003, 3013, 3014 and 3024 Industrial Engines"

  • Specifications Module, SENR5043, "3003, 3013, 3014 and 3024 Industrial Engines"

  • Systems Operation, Testing and Adjusting Module, SENR5047, "3003, 3013, 3014 and 3024 Industrial Engines"

  • Special Publication, PECP6026, "One Safe Source" English language for use in NACD

  • Special Publication, PECP6027, "One Safe Source" English language for use in COSA

  • Special Publication, PECP6028, "One Safe Source" English language for use in non NACD and non COSA

  • Service Manual, REG1139F, "Service Manual Contents Microfiche"

  • Specifications, SENR3130, "Torque Specifications"

  • Special Publication, SEHS7654, "Alignment - General Instructions"

  • Special Publication, LEBH9324, "Industrial Application and Installation Guide"

  • Special Publication, SEBF8029, "Index to Guidelines for Reusable Parts and Salvage Operations"

  • Special Publication, SEBF8062, "Guideline for Reusable Parts - Cleaning and Inspection of Air Filters"

  • Special Instruction, SEHS9031, "Storage Procedure for Caterpillar Products"

  • Special Publication, NEHS0526, "Service Technician Application Guide"

  • Special Instruction, SEHS7768, "Use of 6V-2150 Starting/Charging Analyzer"

  • Special Instruction, SEHS7633, "Battery Test Procedure"

  • Special Instruction, SEHS7332, "Warning Tag - Do Not Operate"

Emissions Warranty

This engine may be Certified and this engine may be covered by an Emissions Warranty. A detailed explanation of the Emissions Warranty that is applicable to Certified engines is found in Supplement, SMBU6981, "Emissions Control Warranty Information". The engine is Certified if the engine has a special label that verifies the certification. A Caterpillar dealer can also inform you if the engine is certified.

Caterpillar Information System:

30SI Series and 34SI Series Alternator General Information
3406E On-Highway Engine Engine Control Module - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Engine Crankcase Breather - Clean
3116 On Highway Engines Crankshaft Main Bearings - Remove
3512B Marine Auxiliary Engines Fumes Filter - Remove and Install
3512B Marine Auxiliary Engines Air Screen Housing - Remove and Install
C-9 Industrial Engine Engine Oil Filter Base
3114, 3116, and 3126 Engines for Caterpillar Built Machines Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Fuel Shutoff Solenoid - Remove and Install
C-15, C-16 and C-18 Truck Engines Engine Oil Pan - Remove and Install
3512B Marine Auxiliary Engines Crankshaft - Install
3114, 3116, and 3126 Industrial and Generator Set Engines Safety Signs and Labels
30SI Series and 34SI Series Alternator Normal Operation
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Emergency Stopping
3003, 3013, 3014 and 3024 Industrial Engines Refill Capacities
3406E and 3456 Generator Set Engines Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Remove
C-15, C-16 and C-18 Truck Engines Water Pump - Remove
SR4 and SR4B Generators and Control Panels Generator Description
SR4 and SR4B Generators and Control Panels Model View Illustrations
Caterpillar Monitoring System for Electronic Modular Control Panel Main Display Module
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.