Engine Control Module - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove nuts (1) and allen head screw (3).
- Remove cover (2).
Show/hide table
Illustration 2 g00625434 - Remove the nut from clamp (5).
- Remove two nuts (6). Remove bar (4).
- Remove the bolts that fasten electronic control module (7) to the cylinder block. Remove electronic control module (7).
Show/hide table
Illustration 1 | g00625429 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install electronic control module (7) on the cylinder block.
- Position bar (4) and install nuts (6).
- Install clamp (5) in position.
Show/hide table
Illustration 4 g00625429 - Position cover (2) and install nuts (1). Tighten allen head screw (3) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
Show/hide table
Illustration 3 | g00625434 |
Caterpillar Information System:
3003, 3013, 3014 and 3024 Industrial Engines Engine Crankcase Breather - Clean
3116 On Highway Engines Crankshaft Main Bearings - Remove
3512B Marine Auxiliary Engines Fumes Filter - Remove and Install
3512B Marine Auxiliary Engines Air Screen Housing - Remove and Install
C-9 Industrial Engine Engine Oil Filter Base
3114, 3116, and 3126 Engines for Caterpillar Built Machines Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Fuel Shutoff Solenoid - Remove and Install
C-15, C-16 and C-18 Truck Engines Engine Oil Pan - Remove and Install
3512B Marine Auxiliary Engines Crankshaft - Install
3512B Marine Auxiliary Engines Crankshaft - Remove
3512B Marine Auxiliary Engines Camshaft - Install
30SI Series and 34SI Series Alternator General Information
3003, 3013, 3014 and 3024 Industrial Engines Reference Material
3114, 3116, and 3126 Industrial and Generator Set Engines Safety Signs and Labels
30SI Series and 34SI Series Alternator Normal Operation
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Emergency Stopping
3003, 3013, 3014 and 3024 Industrial Engines Refill Capacities
3406E and 3456 Generator Set Engines Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Remove
C-15, C-16 and C-18 Truck Engines Water Pump - Remove
SR4 and SR4B Generators and Control Panels Generator Description
SR4 and SR4B Generators and Control Panels Model View Illustrations