Air Compressor Drive Gear - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 132-5451     | 固定夹具     | 1     |
开始:
- 拆卸空气压缩机。 请参阅拆解和组装, "空气压缩机 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在主动齿轮 (2) 上安装工具 (A) 。
Show/hide table
图 1 | g01104318 |
- 拆下螺母 (1) 和主动齿轮 (2) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 132-5451     | 固定夹具     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将主动齿轮 (2) 安置在空气压缩机上。
Show/hide table
图 2 | g01104318 |
- 在主动齿轮 (2) 上安装工具 (A) 。
- 安装螺母 (1) 。 将螺母拧紧至扭矩 170 ± 15 N·m (125 ± 10 lb ft)。
End By: 安装空气压缩机。 请参阅 拆解和组装, "空气压缩机 - 拆卸和安装"。
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Boom) - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Boom) - Remove
A13 Auger Maintenance Interval Schedule
307B Excavator Monitoring System
307B Excavator Power Receptacle - If Equipped
3064 and 3066 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
307B Excavator Operator's Compartment
3064 and 3066 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
W330B Material Handler Operating Technique Information
365B and 365B Series II Excavators Supplement for 3196 Engine Water Separator - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Battery - Remove and Install
SR4B Generators Generator Operation
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Remove
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
307B Excavator Lift Capacities
3126B Engines for Caterpillar Built Machines Crankshaft - Install
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Disassemble
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
307B Excavator Machine System Specifications Recoil Spring
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
5230 Excavator Hydraulic System Power Shift Pressure - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install