307B Excavator Caterpillar

Lift Capacities

Usage:

307B AFB

Show/hide table




Illustration 1	g00586902
(H) Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Reach

Raised Blade

Show/hide table

Table 1
		307B Excavator Swing Boom, a long stick, a 0.28 m³ bucket and 450 mm track shoes ⁽¹⁾ All lifting capacities are in kilograms.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	4.5									820 ⁽²⁾	750	6.56
	3.0 m							980	840	720	600	7.20
	1.5 m					1530	1300	940	800	660	550	7.33
	0.0 m			2610	2170	1410	1190	900	750	690	580	7.01
	-1.5 m	2690 ⁽²⁾		2560	2130	1360	1140			860	720	6.14
	-3.0 m	5000 ⁽²⁾		2630 ⁽²⁾	2190

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 2
		307B Excavator Swing Boom, medium stick, a 0.28 m³ bucket and 450 mm track shoes ⁽¹⁾ All lifting capacities are in kilograms.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	4.5					1180 ⁽²⁾				870 ⁽²⁾		5.95
	3.0 m					1500 ⁽²⁾	1420			840	720	6.67
	1.5 m					1530	1310	960	820	780	660	6.82
	0.0 m			2640	2210	1440	1220			830	700	6.46
	-1.5 m	3580 ⁽²⁾		2650	2220	1420	1200			1080	920	5.45
	-3.0 m			2760	2320

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Lowered Blade

Show/hide table

Table 3
		307B Excavator Swing Boom, a long stick, a 0.28 m³ bucket and 450 mm track shoes ⁽¹⁾ All lifting capacities are in kilograms.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	4.5									820 ⁽²⁾	810	6.56
	3.0 m							1260 ⁽²⁾	900	800 ⁽²⁾	650	7.20
	1.5 m					1870 ⁽²⁾	1390	1540 ⁽²⁾	860	860 ⁽²⁾	600	7.33
	0.0 m			3310 ⁽²⁾	2330	2640 ⁽²⁾	1280	1870 ⁽²⁾	810	1010 ⁽²⁾	630	7.01
	-1.5 m	2690 ⁽²⁾		5260	2280	3020 ⁽²⁾	1230			1380 ⁽²⁾	780	6.14
	-3.0 m	5000 ⁽²⁾		5020 ⁽²⁾	2350

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 4
		307B Excavator Swing Boom, a medium stick, a 0.28 m³ bucket and 450 mm track shoes ⁽¹⁾ All lifting capacities are in kilograms.
		(R)
		1.5 m		3.0 m		4.5 m		6.0 m		Maximum
		(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	(F)	(S)	m
(H)	4.5					1180 ⁽²⁾				870 ⁽²⁾		5.95
	3.0 m					1500 ⁽²⁾				850 ⁽²⁾	770	6.67
	1.5 m					2250 ⁽²⁾	1400	1800 ⁽²⁾	880	920 ⁽²⁾	720	6.82
	0.0 m			3300 ⁽²⁾	2360	2900 ⁽²⁾	1310			1110 ⁽²⁾	760	6.46
	-1.5 m	3580 ⁽²⁾		5370 ⁽²⁾	2370	3090 ⁽²⁾	1290			1550 ⁽²⁾	990	5.45
	-3.0 m			4290 ⁽²⁾	2480

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
^( 2 )	Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Caterpillar Information System:

3126B Engines for Caterpillar Built Machines Crankshaft - Remove

3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Install

3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Remove

SR4B Generators Generator Operation

3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install

3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install

365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Boom) - Install

365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Boom) - Remove

A13 Auger Maintenance Interval Schedule

307B Excavator Monitoring System

307B Excavator Power Receptacle - If Equipped

3064 and 3066 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install

3126B Engines for Caterpillar Built Machines Crankshaft - Install

3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Disassemble

C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover

307B Excavator Machine System Specifications Recoil Spring

3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove

5230 Excavator Hydraulic System Power Shift Pressure - Check

3114, 3116, and 3126 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install

3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Assemble

365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Oil Filter (Hydraulic, Return) - Remove

307B Excavator Machine Systems Final Drive and Travel Motor - Disassemble - Single Speed

M318 Excavator Hydraulic System Control Valve (Stick Lowering) - Test and Adjust

A13 Auger Frame Mounting Bracket - Inspect - Skid Steer Loader Only