Drift Reduction Valve (Boom) - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Fasten a lifting strap and a hoist to the drift reduction valve. Install the drift reduction valve (13) to the machine. The weight of the valve is 36 kg (80 lb).
Show/hide table
 | |
| Illustration 1 | g00602933 |
- Install bolts (12) .
Show/hide table
 | |
| Illustration 2 | g00602932 |
- Install clamp (10). Install the washers and two bolts (11) .
Show/hide table
 | |
| Illustration 3 | g00609837 |
- Connect two hose assemblies (9) .
Show/hide table
 | |
| Illustration 4 | g00609834 |
Show/hide table
 | |
| Illustration 5 | g00602880 |
- Install bolts (6) to pipe (8) .
- Connect hose (7) .
- Connect clip (5) that holds hose (4) to pipe (8) .
- Install electrical connector (3) .
- Install walkway (2). Install the washers and five bolts (1) .
Show/hide table
 | |
| Illustration 6 | g00609831 |
Caterpillar Information System:
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Boom) - Remove
A13 Auger Maintenance Interval Schedule
307B Excavator Monitoring System
307B Excavator Power Receptacle - If Equipped
3064 and 3066 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
307B Excavator Operator's Compartment
3064 and 3066 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
W330B Material Handler Operating Technique Information
365B and 365B Series II Excavators Supplement for 3196 Engine Water Separator - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Battery - Remove and Install
W330B Material Handler Equipment Lowering with Engine Stopped
3126B and 3126E On-highway Engines Alternator - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install
SR4B Generators Generator Operation
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Remove
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
307B Excavator Lift Capacities
3126B Engines for Caterpillar Built Machines Crankshaft - Install
3064 and 3066 Engines for Caterpillar Built Machines Water Pump - Disassemble
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
307B Excavator Machine System Specifications Recoil Spring
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove