| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-0327 | Crowfoot Wrench | 1 |
| B | 180-0186 | Removal Tool | 1 |
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Note: If the engine is equipped with a tube assembly then proceed to Step 1. If the engine is equipped with a hose assembly then go to Step 3.
- Use Tooling (A) in order to remove tube assembly (1) and tube assembly (2).
Note: If the engine is equipped with a hose assembly, use Tooling (B). Disconnect fitting (4).
- Disconnect harness assembly (3).
- Use Tooling (A) to remove tube assembly (2).
- Remove bolts (6) and remove unit injector hydraulic pump (5).
Show/hide table
Illustration 2 g01025556 - Remove O-ring seal (7).
- Remove drive gear (8).
| |
| Illustration 1 | g01025536 |
