Little or No Valve Lash
- Worn valve seat or worn valve face
Worn Valve Seat or Worn Valve Face
Recondition the cylinder head. Refer to Disassembly and Assembly. Reassemble the engine and adjust the valve clearance. Refer to Testing And Adjusting, "Air Inlet And Exhaust System".
Caterpillar Information System:
3114, 3116 and 3126 Engines Air Inlet Heater - If Equipped
3054B Industrial Engine Reference Material
3126B Engines for Caterpillar Built Machines Water Pump - Assemble
C-15, C-16 and C-18 Truck Engines Water Temperature Regulator - Remove and Install
SR4B Generators Resistor - Test
SR4B Generators Winding - Test
3126B Engines for Caterpillar Built Machines Water Pump - Disassemble
3500B Engines Camshaft Bearings - Install
3524B Engine for Caterpillar Built Machines Camshaft Bearings - Remove
3126B and 3126E On-highway Engines Water Pump - Install
3034 Marine Engine Water Temperature Regulator Housing
3126 Truck Engine Military Water Pump - Remove
3114, 3116 and 3126 Engines Loss of Coolant
SR4B Generators Leads - Connect
3406E Generator Set Engines Customer Specified Parameters
3126 Truck Engine Military Engine Oil Pump - Remove
3126 Truck Engine Military Engine Oil Pump - Install
3126 Truck Engine Military Engine Oil Pump - Disassemble
SR4B Generators Exciter Field - Flash
C-9 Engines for Caterpillar Built Machines Lifter Group
SR4B Generators Generator - Dry
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 190 FMI 2 Speed Sensor (Engine) Incorrect Signal - Test
G3304 and G3306 Engines Valve Mechanism
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 190 FMI 3 Speed Sensor (Engine) Voltage Above Normal - Test