Track Roller - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
(A)     | 8S-7640     | Stand     | 2     |
8S-7611 | Tube     | 2     | |
8S-7615 | Pin     | 2     | |
(B)     | FT-1310     | Track Roller Lifting Fork     | 1     |
- Be sure that the mounting surfaces on the track roller, the track guide and the undercarriage frame are clean and free of dirt and debris prior to installing the track roller and the track guide.
- Use Tooling (B) to put track roller (2) in position on the undercarriage frame. The weight of the track roller is 34 kg (75 lb). Make sure that the plug in the roller is facing toward the outside of the undercarriage frame. Install the four bolts that hold the roller in position.
Show/hide table
Illustration 1 | g00652942 |
- Use Tooling (B) to put track guide (1) in position on the undercarriage frame. The weight of the track guide is approximately 50 kg (110 lb). Install the four bolts that hold the guide.
Show/hide table
Illustration 2 | g00652920 |
- Prior to lowering the machine to the ground and tightening the track, be sure that all of the track rollers rotate smoothly by hand.
- Lift the machine off Tooling (A). Remove Tooling (A) from the machine. Lower the machine to the floor.
Show/hide table
Illustration 3 | g00367754 |
- Tighten the tension of the track.
Reference: Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the correct procedure.
Caterpillar Information System:
3412 Generator Set Engines Cylinder Liner
315B L Excavator Joystick Controls
M312 Excavator Machine System Control Valve (Stick Lowering)
307B Excavator Shipping Specifications - One-Piece Boom
315B Excavator Machine Systems Track Roller - Remove
M312 Excavator Machine System Lines (Boom Lowering Valve)
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure
M315 Excavator Machine System Boom - 5.05 m (16.568 ft)
315B Excavator Machine Systems Track Carrier Roller - Assemble
307B Excavator Offset Boom Control - If Equipped
330B Excavator Hydraulic System Operational Checks
315B Excavator Machine Systems Track Roller - Disassemble
M312 Excavator Machine System Bucket Linkage - Retention
315B Excavator Machine Systems Tank and Filter (Hydraulic) - Install
315B Excavator Machine Systems Track Roller - Assemble
315B and 315B L Excavator Supplement For 3046 Engine Engine and Piston Pump - Install
M315 Excavator Machine System Boom - 1.99 m (6.529 ft)
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
315B Excavator Machine Systems Track - Separate
315B Excavator Machine Systems Track - Connect
M312 Excavator Hydraulic System Engine Performance - Test
M318 Excavator Hydraulic System Engine Performance - Test
315B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install